Blown sub?

Digital Designs
10+ year member

Aclministrator
Well this morning I was bumping like usual, and all was fine, but then the bass just cut out. No sound or anything. I get home, pop the trunk and the amp is in protect. I was having ground problems before, so I figured that was probably the case. I redid the ground to 3 different spots, and the amp would only stay out of protect and the sub would play until 15 volume(normally around 45 when bumping.) I thought shiit my amp might be toast, but then I thought maybe its the sub. The speaker wires were really hot(hotter than what I would think they would get) I didnt bother taking the sub out of the box, but I put my DMM on the terminal on the box, and it read 0.8 ohms. My sub is a dual 4 ohm >.

 
that audiopipe amp is way way to much power for the type r daily...
Sub is D4 and the AP is rated at 950@2ohm. I set it with a DMM to like 46.5 volts which is like 700 watts or something. I dont remember the exact settings I put it to. But a few days ago I turned up the low frequency on the EQ a tad, and I think that is what did it.

 
Sub is D4 and the AP is rated at 950@2ohm. I set it with a DMM to like 46.5 volts which is like 700 watts or something. I dont remember the exact settings I put it to. But a few days ago I turned up the low frequency on the EQ a tad, and I think that is what did it.

//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif en......it could be.//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Digital Designs

10+ year member
Aclministrator
Thread starter
Digital Designs
Joined
Location
Limestone NY
Start date
Participants
Who Replied
Replies
5
Views
590
Last reply date
Last reply from
microhaxo
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top