1. Product:
Memphis 16-MCD4KW
2. Specs:
1000x1 @ 4 ohms
2000x1 @ 2 ohms
4000x1 @ 1 ohm
3. Description/Condition:
Some scratches on the heatsink. Not bad really. I tried to capture them the best I could. I would say 7.5-8/10
The last owner of the amp must have shorted the terminals on the amp as some of the plastic melted away. I am guessing this is the cause of the amps problems.
The power Supply is blown. Should be around $200 to repair. The amp does power on and the protect light stays green (no protect), the amp does not produce full power however.
I have all the parts as seen in the picture. I can either put the fet clips on or leave them off. Which ever the repair person would like (or buyer). I will be putting the board into the case for safe shipment.
4. Price: :
$260 Shipped OBO!! Looking for a quick sell.
6. Pictures:
Memphis 16-MCD4KW
2. Specs:
1000x1 @ 4 ohms
2000x1 @ 2 ohms
4000x1 @ 1 ohm
3. Description/Condition:
Some scratches on the heatsink. Not bad really. I tried to capture them the best I could. I would say 7.5-8/10
The last owner of the amp must have shorted the terminals on the amp as some of the plastic melted away. I am guessing this is the cause of the amps problems.
The power Supply is blown. Should be around $200 to repair. The amp does power on and the protect light stays green (no protect), the amp does not produce full power however.
I have all the parts as seen in the picture. I can either put the fet clips on or leave them off. Which ever the repair person would like (or buyer). I will be putting the board into the case for safe shipment.
4. Price: :
$260 Shipped OBO!! Looking for a quick sell.
6. Pictures:
