BIG 3 yay...!!!

[SAG3 5,000+ posts]

nice

 

[DJGTSR 10+ year member]

You don't have to pull out the stock wires, just get a measuring tape like they use for tailoring clothes. Run it loosely where you want to run the wire and add up the measurements. I'd by an extra foot or so to give you room to play with...

Good idea, thanks!

 

[GO-N DEF 10+ year member]

Good idea, thanks!

No prob. Saves alot of time.

If you don't have a measuring tape, you can always use some string or, preferably stiff rope (simulates the wire's inflexibility). Then either measure it with a ruler or simply take it to a store and have an employee cut the same size wire...

 

[Mynameismcgyver 10+ year member]

Can you do the Big 3 and keep all the existing wire (except from the Alt to the Battery)?

 

[GO-N DEF 10+ year member]

Can you do the Big 3 and keep all the existing wire (except from the Alt to the Battery)?

Yes (you dont have to remove that one either).

My stock wires don't connect my alternator directly to my battery. My Big 3 wires now does...