Southwest Region AZ Meet?

[ToyTundra 10+ year member]

http://www.caraudio.com/forum/showthread.php?t=186867&page=2 is where it starts.

parallel thread:scionlife forum

there's a dead link on page 1 http://chroniccaraudiosucks.com that used to have pics. Its probably down due to a settlment of some kind. Wayback machine can't find it (or i **** at the internet).

The short version is the shop was told not to drive a perfectly restored 58 (chevy?) they did anyway and crashed into a wall. Claimed the "brakes failed" //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[SHiZNiLTi 10+ year member]

Update 4/15:

I just got done running some more 1/0 gauge, re-made all my grounds and installed another yellow top optima in the back. I also ran 1/0 gauge directly to my t30001bd.

I set the gains to the amp just a tad under 1/2 and with these electrical upgrades I hardly drop that much in voltage and the setup sounds insainly loud.

Wednesday I get my 260 amp alt and that will keep my system running stron at 14.4 during full tilt.

I also did some sound deadening on the rear hatch and sealed up the rear pillars so there isn't as much vibrations.

The only big issue is that my Pioneer Premier DEH-P680 can't handle this much bass and skips like no other when playing anything with a good bass line at full tilt, but don't worry I've got a fix for that //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif This saturday I'm installing a Pioneer Avic-N1 GPS system. I'm pretty sure that it will handle the bass better. If not It looks like Im using the AUX in and will hafta switch over to ipod.

Lets get some poeple to meet up this weekend, hopefully Im able to function after 4/20 so I can get the GPS installed early saturday morning.

Here's some pics of the t30001bd that I just got...

http://www.caraudio.com/forum/showthread.php?t=227248

I'll take pics of my setup once I get the N1 installed and box finished in gloss black..... or maybee black pleather which is much less time consuming.

 

[Acidburn 5,000+ posts]

i've got all 6 drivers working //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Bring97 10+ year member]

eh my car is in the shop AGAIN.... but once i get it back the XXX is going in and the 40.1 is being wired to .5 for it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[HitManSE 10+ year member]

Hopefully ill convince myself to get the car washed before the meet. Thats about the extent of things to do on my car //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[Bring97 10+ year member]

ok guys sorry ive been way too busy, dont know if you all still want to meet up on the 5th, the XXXs will be out then and i might not have my car but im still down to meet and shoot the ****.

 

[ToyTundra 10+ year member]

If my stuff is done (or close) i plan to show. The deciding factor is if i swap my Hu to the 7100 that i havn't bought yet. Without it my setup sounds like poo. Everything else i want to do is just cosmetic.

 

[Acidburn 5,000+ posts]

you all should come whether your system is working or not

 

[CapzNCoilz 10+ year member]

alright gang.

I have the 2 15" pounding away in the car...When's the meet?

 

[Beat_Dominator 5,000+ posts]

I still need to fiberglass ~8 layers on these.

 

[Acidburn 5,000+ posts]

hurry up Evan, you're slow

and the meet is still scheduled for May 5th IIRC

 

[Tempe 10+ year member]

Time???????

I work that day. If y'all pick a time I can switch with someone and hopefully (crosses fingers) be done by like 1:30 pm.

T

 

[Acidburn 5,000+ posts]

Time???????
I work that day. If y'all pick a time I can switch with someone and hopefully (crosses fingers) be done by like 1:30 pm.

T

that should be ok, i think we're planning on meeting early afternoon

 

[Beat_Dominator 5,000+ posts]

Bah.

 

[SHiZNiLTi 10+ year member]

So it's May 5th for sure?