audiopipe 30001d @1ohm ok or not

[sexy 10+ year member]

i just got one from ebay i didnt notice that it said bridged minimun load was 2 ohm . does anyone know if these things can run at 1ohm without frying i was wanting to get another but that was when i thought they could be run at 1ohm i also thought they were mono amps because they said 30001 i just wasnt paying attentshion i guess

Click to read more...

 

[deathpenalty18 10+ year member]

if you have really good electrical it will do one ohm strapped! be carful though i would suggest you dont try if you dont have a really good electrical!

 

[ktraughb 10+ year member]

well theyre a mono amp, but theyre dual mono (it is actually two 1500ds already strapped internally). therefore you can safely run a 1 ohm load on each set of channels, or total at 2 ohms. if it makes you feel any better you can kinda look at this as 1/2 ohm. not really but it seems that way if you dont think of it as 2 amps. but, if youre trying to bridge the two channels together i do know that many people have run them at 1 ohm without problems considering they have very strong electrical. if you have voltage drops i would not recommend it at all. i would stick with a total 2 ohm load.

 

[SPLaudio 5,000+ posts]

as long as electric is good 1ohm is fine. better have a 2nd huge battery min with good wire.