ATTN: buick owners

[scarolinablazin 10+ year member]

build a floor console to house the headunit and put some volt gauges or something where it was.

 

[natisfynest 10+ year member]

try these

 

[sue bee 10+ year member]

try these

Yea, do this. Also, try dremmeling some shit for more space.

 

[scarolinablazin 10+ year member]

try these

Yea, do this. Also, try dremmeling some shit for more space.

can't use those going active. would be no left right channel seperation

 

[lincolntc690 10+ year member]

no more to dremel, i used a heat gun on the heater ducts and cut what was in the way!

i cant use angled rcas because of how and where the rcas are on the h/u

 

[lincolntc690 10+ year member]

build a floor console to house the headunit and put some volt gauges or something where it was.

this is a future project since he doent like that the middle is all open (across the floor) i have a 6-8" center channel idea

 

[natisfynest 10+ year member]

can't use those going active. would be no left right channel seperation

thats the only pic i found but couldnt he just use 2 single 90 degree adapters

 

[lincolntc690 10+ year member]

i cant find a pic of the 9887 connection side, but the way its set up you couldnt get 3 sets of angled to plug into the h/u

 

[natisfynest 10+ year member]

well then you have few options you can

a)build a floor console

b) take the headunit apart and solder in some different rca connections

c)get a new head unint with different rca connections

d) be SOL