i have a 4xs and cant get it to give me a bandpass poutput. im confused about how to run a bandpass system . what do i set what crossover at. i need from 400hz to 2khz what do i set as the points. my options are front high pass, rear highpass, front low pass, rear low pass. I should run a wire from the rear lowpass to the front highpass correct? head unit to the rear input. I understand that but what do i change as 400 hz and 2khz. my options are X1 midrange/mid-bass x over point, X2 tweeter/midrange x over point, P1 Mid-bass/ subwoofer x ovder point, P2 sub sonic filter, S subwoofer x over piont. What do i put the 400 and 2khz chips in Thank You for helping.
