Are these subwoofers SVC or DVC? (Pic inside)

[NJTStang11 10+ year member]

Alright so on another board I found a pair of MTX 9500 10" Subwoofers. I message him and ask him for the voice coil config and he tells me SVC and sends along a couple pics. I thought SVC subs only had one Pos (+) and one Neg (-)? I see two here. That means one of three things.

#1-I am stupid and SVC subs can have 2 Pos/Negs

#2-He is stupid and just guessed

#3-The pictures arent of the actual woofer he owns, which seems unlikely because it is a local board and I'd be picking them up.

Click to read more...

 

[Alpineinstaller 10+ year member]

I see only one pair of tinsel leads, but i cant say for sure Im not formilar with that sub, you need to see a side pic to tell..

 

[DaGh0st 5,000+ posts]

Looks to be a SVC.

 

[NJTStang11 10+ year member]

Looks to be a SVC.

So I'm prolly gonna go with #1 with me being stupid. I always thought SVC subs only had one slot for neg/pos, while these have two. Sorry to sound so noobish, but mind explaining to me how u knows it SVC?

 

[BassAce 10+ year member]

If it's a T9510-04 then it's a svc, if it's a T9510-44 then it is a DVC.

 

[DaGh0st 5,000+ posts]

So I'm prolly gonna go with #1 with me being stupid. I always thought SVC subs only had one slot for neg/pos, while these have two. Sorry to sound so noobish, but mind explaining to me how u knows it SVC?

First im pretty much going on what you have shown and since you only had a pic with one terminal with one lead going to each the pos and the neg im assumeing its going to be svc...audiobahn uses the same style terminals aswell so you can wire subs together to get the imp. load you want.

 

[NJTStang11 10+ year member]

First im pretty much going on what you have shown and since you only had a pic with one terminal with one lead going to each the pos and the neg im assumeing its going to be svc...audiobahn uses the same style terminals aswell so you can wire subs together to get the imp. load you want.

Alright now I understand. The extra Positive/Negative are there to run to the amp so you can run One sub Pos to Pos, Neg to Neg, and then use the other 2 terminals to run to the amp for a cleaner fit/look.

Thanks man

 

[Abel 10+ year member]

Dvc

 

[NJTStang11 10+ year member]

Dvc

wtf?

Now Im really ****in confused.

 

[shortyg83 10+ year member]

Dvc

you come out and just say dvc? lol no reason

from that pic there is no way to really tell it looks to be single voice coil because you only have one actual set of leads there

 

[azbass 5,000+ posts]

how about ask for more pics //content.invisioncic.com/y282845/emoticons/idea.gif.5acb6a39a9b92425414c316dda202bad.gif

 

[Blove1991 10+ year member]

how about ask for more pics //content.invisioncic.com/y282845/emoticons/idea.gif.5acb6a39a9b92425414c316dda202bad.gif

lol, maybe another on other side? I dont know much about MTX

Let alone car audio //content.invisioncic.com/y282845/emoticons/hide.gif.2d479cfd917eedfe201353b91522ceab.gif

 

[azbass 5,000+ posts]

are people really this slow minded to not think of simple things or solutions?

 

[Pyro_By_Nature 5,000+ posts]

Can't tell if it's SVC or DVC from this pic, no one can.

The other terminal would be 180 degrees from this one, aka impossible to see from that angle.

Best bet would ask him for the model number, or more pics as people have said in this thread.

 

[NJTStang11 10+ year member]

are people really this slow minded to not think of simple things or solutions?

****, didn't think this was gonna go this far, just expected a quick answer. Thanks for the replies guys, ill just call him tomorrow and ask him to read me the model #. Just got anxious and figured quicker, easier answer here. Thanks tho.