AQ or DD

[Buck 5,000+ posts]

16-4's = 8-2's = 4-1's = 2-2's = 1-1.

Ok gotcha //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Compjake 10+ year member]

http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/4DVC_4-ohm_mono.jpg

do that to both sets of 4 then wire both in parallel for a 1ohm load.

 

[Buck 5,000+ posts]

http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/4DVC_4-ohm_mono.jpg
do that to both sets of 4 then wire both in parallel for a 1ohm load.

Ya I did that on rf.com and that's what I thought it should be.

 

[Compjake 10+ year member]

Sounds like your spot on then!

make sure you do a build log for this. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Buck 5,000+ posts]

Sounds like your spot on then!
make sure you do a build log for this. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Oh definitely. I got to get my truck repaired because I got hit this weekend. Hopefully I'll find a way to get money out of that. And then I gotta build my electrical up and then it'll come.

 

[Buck 5,000+ posts]

bump

 

[AudioXtremes 10+ year member]

Oops. Not paying attention ftl.

 

[Buck 5,000+ posts]

I think I'm going with AQ

 

[ARSkemp 10+ year member]

Haven't heard the dds but i very much enjoy the SDCs i have now //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif. Off the amount of power you have you probably couldn't go wrong either way.

 

[Buck 5,000+ posts]

Haven't heard the dds but i very much enjoy the SDCs i have now //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif. Off the amount of power you have you probably couldn't go wrong either way.

How much power you got going to them?

 

[Notloud00 10+ year member]

How much power you got going to them?

they get loud off little power and can handle alot. u will be very happy wit um //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Buck 5,000+ posts]

they get loud off little power and can handle alot. u will be very happy wit um //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I could, with an AQ3500D, 437.5 watts a piece.

 

[Notloud00 10+ year member]

I could, with an AQ3500D, 437.5 watts a piece.

yea imma see what they do with over 1k a piece and ill get back to ya //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Buck 5,000+ posts]

yea imma see what they do with over 1k a piece and ill get back to ya //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Or a DD Z1a at 625. I don't have enough money for 1k a piece.

 

[ARSkemp 10+ year member]

How much power you got going to them?

Not sure on exact power, i set them w/a dmm to ~ 1200 watts each using the AB500.1 in my sig (running it @ .5ohm). After imp rise and voltage drop i'm not sure, but voltage doesn't drop lower than 12.9 playing full tilt @ idle.

I also tried setting the gain by ear, but they didn't seem to like taking any more power than that.

They take the power i'm giving them well for daily (what i set w/the dmm), but i wouldn't try running any more power than i'm running now.

All the info from my setup + a link to my build log is in my sig if you want to check it out.

edit:

i just noticed you have a FI Q. I had a 15" in the same box you had (except slot port instead of aero). I actually enjoy the sound of the AQs compared to the Q. What kind of music do you listen to? I found the AQs sound similiar on rap (only louder) but imo sound better on rock than my FI.