AQ HDC 18 vs. 3000RMS

[mlstrass 5,000+ posts]

I let mine play a few days out in the driveway, plus normal commuting for work and made sure I got about 12 hours on them before cranking it up. NO noise so it was worth being quiet for a few days...

I know others that beat on them right out of the box with no issues, but I wasn't taking any chances.

 

[mlstrass 5,000+ posts]

mine came with them. Iv put about 8+ hours into them now and there starting to lossen up

They are NOT loosening up, the dual layer spiders are taking a "set". It will take a LOT more then 8 hours to get those surrounds to loosen up //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[TC2k15x2 10+ year member]

mine came with them. Iv put about 8+ hours into them now and there starting to lossen up

Yea I seen the slip you got in a picture you posted, should I even worry about it? I doubt its going to make a difference if I start to wang them now.

 

[MasterOfAllBass 10+ year member]

They are NOT loosening up, the dual layer spiders are taking a "set". It will take a LOT more then 8 hours to get those surrounds to loosen up //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

thats what i ment

 

[MasterOfAllBass 10+ year member]

Yea I seen the slip you got in a picture you posted, should I even worry about it? I doubt its going to make a difference if I start to wang them now.

if you have to put a good ammount of presser to move the cone when give it some more time

 

[TC2k15x2 10+ year member]

oh true, so what do you have your LPF's set to Masterfoallbass?

 

[tapout383 10+ year member]

oh true, so what do you have your LPF's set to Masterfoallbass?

you can either cut all your finger off or take your volume button of your h/u id say go with the first option as i did