Anyone with spare time wanna double check my order to see if I'm missing anything?

[verb1999]

I'm about to put in my order for all my wires, terminals, etc., and I just wanna make sure there isn't anything I forgot.

My system will consist of 8 speakers. 2 15" Orion XTR Pro subs, 2 Boston tweeters, 2 Boston 6.5's, 2 Boston 4x6 plates. Orion XTR Pro 1000 for the subs, Orion HCCA 150r for the components. I also have 2 Xstatic BatCap 2000's, one for each amp. And I bought a Kinetik HC1400 for under the hood as well.

Ok I have this listed for my order:

18' of 0G power wire

15' of 0G ground wire (10' of this is for doing a big 3 upgrade)

15' of 4G power wire

12' of 4G ground wire

1 0G bettery terminal

1 0G fuse holder for under the hood by the car battery

1 (1 OG in, 2 4G out) fused distribution block [for power]

1 (1 OG in, 2 4G out) distribution block [for ground]

8 4G terminals (for wires going to and from the BatCaps)

7 0G terminals (6 for the big 3 upgrade, one for the ground)

and last 2 sets of RCA cables or interconnects.

You guys see anything I'm missing? Thanks boys!

Click to read more...

 

[lostdaytomorrow 10+ year member]

Why not 0/1 awg for everything?

 

[casper97ta 10+ year member]

You need some speaker wire too. I would use 8g for the subs and depending on where you're installing the crossovers for the bostons you need some wire for them. And maybe some spade terminals for the speaker to amp hook ups.

 

[verb1999]

The amps only have 4G plugs...

And speaker wire! Good call. I actually had that written down on my original list...duh. That could help. And I'll look into the spade terminals. Thanks fellas.