anyone w/ an re se 12" slot port box tuned to about 30hz

[stalephotograph 10+ year member]

ok so i just bought myself and re se 12" lastnight and im needing a box. i was thinking of a box thats about 2^3 around 30hz i believe. the re site says for a single, which is what im going w/ needs a 2.5^3 at 35hz sql but when you goto sq/sql volumes it says the se 12" ported needs only 1.5^3 at 32hz sql. and the design for the 2.5^3 at 35hz only gives 4 dimensions. if anyone reads this and has about the same tuned box as i want, would you care to give me the dimensions of the box so i can start building. im new to slot ports and i still dont understand the portwall building/tuning all that well.

Click to read more...

 

[stalephotograph 10+ year member]

anyone around here have plans they wish to share?

 

[Moe Lester 10+ year member]

I sell plans for a low price and I can design you something that would work very nicely with your SE //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[stalephotograph 10+ year member]

I sell plans for a low price and I can design you something that would work very nicely with your SE //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

how much would you charge me for a design for my se? and what kind of design would you prefer for someone who has an ext. cab s10 that listens to a lot of hardcore music ie:as i lay daying, throwdown, trivium, something w. double bass and some rap music? ill most likely be running a directed audio 1500d amp on this sub.

 

[Moe Lester 10+ year member]

ygpm

 

[stalephotograph 10+ year member]

ok so im thinking of going w/ a sealed enclosure first to test things out. re recomends a 1.0 cu ft sealed enclosure for the re se 12". i was on 12volt.com an came up w/ the following.........

width = 14.1

height = 14.1

depth = 14.1

thickness = .74

internal volume = 1.15762

sub displacment = .15

would this work out to get the internal volume to 1.0 cu ft after the .15 cu ft sub displacment for my re se 12"?

 

[stalephotograph 10+ year member]

ttt please help someone.

 

[stalephotograph 10+ year member]

i cant seem to make a new thread anymore so for my question above i need to get answered. no one seems to really pay attention to this one so i figure i would make a new thread for people to see but it wont allow me to make a new thread. it tells me a fatal error has occured. so please someone help me out.

 

[swimfreak26 10+ year member]

Talk to moe lester (the guy that sent you the PM), very knowledgeable.

 

[nVRuckus 5,000+ posts]

I would go ported with that SE, they are not overly loud ported and @ 32hz have great SQ and sealed is not loud at all and the SQ is not much different from the ported box.

 

[spicmonster 10+ year member]

i have a 12 re se...its ok...bottoms out real easily...guess amp too powerful //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

i like the bass from my e8as better.....one man one opinon

 

[swimfreak26 10+ year member]

i like the bass from my e8as better.....one man one opinon

The a series had absolutely beautiful sound...and were in a different realm than the SE's.

They also cost twice as much.

 

[Rza 10+ year member]

what kind of amp did you use to bottom out an SE?

 

[PowerNaudio 10+ year member]

i know the re se 10" can get pretty loud in a sq enclosure. 1.35 cu ft @ some like 25Hz will give you low *** bass while keeping excursion under control.

i would have to calculate the se 12", but im sure it will get just as low just a hair louder. with a stronger thump. its also depends on what amp youre going to use and how much space you actualy have avalible for the box.

 

[HowLowd 10+ year member]

ok so im thinking of going w/ a sealed enclosure first to test things out. re recomends a 1.0 cu ft sealed enclosure for the re se 12". i was on 12volt.com an came up w/ the following.........
width = 14.1

height = 14.1

depth = 14.1

thickness = .74

internal volume = 1.15762

sub displacment = .15

would this work out to get the internal volume to 1.0 cu ft after the .15 cu ft sub displacment for my re se 12"?

to figure that up you would look at the internal specs and multiply length x width x dept /1728. From that if you get 1.15762 and you subtract .15 for woofer displavement and get 1cu then your good.

Now my personal opinion would be to get with one of the designers on here and get a design. Youll have to give them all of the info as far as HOW much space youhave and take good measurements, maybe pics, but their pretty good. Power offers designs for 9$ something and moe designed mine in like thirty minutes //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif (I **** on port tuning )

good luck