Anyone Know Where I Can find This Sub?

[Jeffdachef 5,000+ posts]

Lmao, Would I have to run the Sub off an half ohm stable amp since the only impedance is half ohm & 1ohm?

You can get the .5 ohm and wire in series for 1 ohm. You can get the D1 and wire to half ohm if you have the proper electricals.

 

[AARKing419]

You can get the .5 ohm and wire in series for 1 ohm. You can get the D1 and wire to half ohm if you have the proper electricals.

Thank you but please explain if i were to get the half ohm how would i run it at 1 ohm on a BA 5000.1D , i plan on running it on 2500 RMS.

 

[Louisiana_CRX 5,000+ posts]

Thank you but please explain if i were to get the half ohm how would i run it at 1 ohm on a BA 5000.1D , i plan on running it on 2500 RMS.

If that amp does 5000 @ 1 ohm you'll want the dual 1 so you can wire it too 2 ohm...

 

[Jeffdachef 5,000+ posts]

Thank you but please explain if i were to get the half ohm how would i run it at 1 ohm on a BA 5000.1D , i plan on running it on 2500 RMS.

Wire in series, Positive to negative jumper to both coils and then negative sub to negative amp, positive sub to positive amp.

With the ppi, you should run it at half ohm if you have the electrical upgrades. However, gonna tell you ahead of time, that amp's not gonna tickle that sub even if you get half ohm power out of it.

 

[bgowdy 5,000+ posts]

If that amp does 5000 @ 1 ohm you'll want the dual 1 so you can wire it too 2 ohm...

the BA5000.1 is rated 2500 @ 1 ohm, he would be better off getting a Dual .5 ohm sub

 

[Louisiana_CRX 5,000+ posts]

the BA5000.1 is rated 2500 @ 1 ohm, he would be better off getting a Dual .5 ohm sub

Thats true...Im not familiar with that amp...I thought that might of been the 1 ohm rating

 

[AARKing419]

You can get a 1 ohm load off a dual half

How would you wire it to get a 1ohm load? Thanks btw

 

[Louisiana_CRX 5,000+ posts]

How would you wire it to get a 1ohm load? Thanks btw

They would need to be wired in series...tie a neg and pos lead together off each VC then use the remaining pos and neg to wire to the amp pos and neg output...

 

[LosIsATool 5,000+ posts]

Thats true...Im not familiar with that amp...I thought that might of been the 1 ohm rating

They are rated at 2500 and do 1500... Just like its sister the power acustik Gothom

 

[Louisiana_CRX 5,000+ posts]

They are rated at 2500 and do 1500... Just like its sister the power acustik Gothom

Ive never ran those kind of amps before...I always thought they were dirty power

 

[LosIsATool 5,000+ posts]

Ive never ran those kind of amps before...I always thought they were dirty power

People on here keep pushing them for some reason. PPI had a good run just to grab a fan base I guess.

 

[Louisiana_CRX 5,000+ posts]

People on here keep pushing them for some reason. PPI had a good run just to grab a fan base I guess.

I guess they do make noise

 

[LosIsATool 5,000+ posts]

I guess they do make noise

For $200 I think I could find better.

 

[bgowdy 5,000+ posts]

They are rated at 2500 and do 1500... Just like its sister the power acustik Gothom

When and were was it clamped?

 

[bgowdy 5,000+ posts]

The PPI ba7000.1 did just under rated at 1.3 ohm at 12v