Anyone have X-Over Pro? I need a XO designed?

[mavster 10+ year member]

If anyone has it, could they put together a schematic for me?

Thanks

Click to read more...

 

[BrianChia 10+ year member]

What drivers?

 

[mavster 10+ year member]

first array;

Dayton RS225S-8

Dayton RS52AN-8

Dayton DC28FS-8

I do realize something has to be done, to lower the efficiency of the mid though...

Second Array;

Dayton DC28FS-8

2 x Pioneer C16LU20-51F

Same deal with woofer's efficiency...

 

[joetama 5,000+ posts]

Hi...

 

[mavster 10+ year member]

Hi...

any help?

 

[BrianChia 10+ year member]

first array;
Dayton RS225S-8

Dayton RS52AN-8

Dayton DC28FS-8

I do realize something has to be done, to lower the efficiency of the mid though...

Second Array;

Dayton DC28FS-8

2 x Pioneer C16LU20-51F

Same deal with woofer's efficiency...

First speaker ... check out Zaph's new design and build that instead.

Second speaker ... I'll see if I can get some time to work on it later this week.

 

[mavster 10+ year member]

I have a different woofer? I have the 225 not the 180?

 

[BrianChia 10+ year member]

Have you bought the drivers already? If you haven't then either build Zaph's or build this:

http://www.rjbaudio.com/Daedalus/daedalus.html

 

[mavster 10+ year member]

Have you bought the drivers already? If you haven't then either build Zaph's or build this:
http://www.rjbaudio.com/Daedalus/daedalus.html

uh ya?

Don't tell me I screwed myself...AGAIN!?

 

[BrianChia 10+ year member]

No, you didn't screw yourself at all.

It's just easier to follow someone else's plan if you can't make your own crossovers. It takes a lot of time to really get them perfect so if some really talented/experienced designers put in the effort and post up free schematics why not copy them? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[BrianChia 10+ year member]

I threw this together fairly quickly but unfortunately you don't want to build this crossover:

 

[joetama 5,000+ posts]

What program are you using?

 

[mavster 10+ year member]

why don't I?

 

[BrianChia 10+ year member]

I'm using Speaker workshop.

It's still pretty crude, needs lots of tweaking, impendance isn't very smooth, and the component values are big. I'd probably go with electrolytic caps if I were to actually build this.

 

[thylantyr 10+ year member]

Bypass electrolytics with the small value polypropylene caps, should be nicer.