Anyone ever install a system in there tool box?

Once my shop's finished I'll have a little setup going in there...more of a workbench system...but still, it should be similar //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
all my tools are thrown into an orange home depot bucket. :/so that's a no go on the tool bucket system.
Hmm...whats the diameter of the bucket opening //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif...bet it could be an enclosure pretty easily //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Hmm...whats the diameter of the bucket opening //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif...bet it could be an enclosure pretty easily //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
one of those big *** buckets they sell. maybe 15gallon? i auno. i could glass up a 15 into it but would need another bucket attached for air space. even then it wouldn't be a system it would just be an enclosure tool bucket. or something. lol

 
define toolbox


Well the box i have is one of those half stack craftsman boxes with like the work bench type thing on top, a cabinent on the side with 2 draws above it, i made 2 small boxes for the 6.5s and mounted em on top, then i cut a hole in one of the draws on the side, and installed a head unit, then on the bottom where the cabinet was i removed the door and it was pretty much perfect spot to put a small box for the 8" so i put it there, and on the side of the box i mounted the power supply and the amp

 
above mentioned toolbox

Tool_Box_with_Refrigerator_1.jpg


 
Hmm...whats the diameter of the bucket opening //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif...bet it could be an enclosure pretty easily //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Sub-in-a-bucket... 5 gallon pails work well for 12"s

 
id mutch rather just keep what i have..

a Denon avr-1603 running 4 set's of pre amped Edifier studio speaker's

and 1 ported 10'' Kove armogeddon sub off of 1000w home audio plate amp..

sound's like a club stereo system when i turn it up..

gunna do allmost the same thing only 2 12'' sub's in my garage at home..

 
They sell them at Lowes.
And Home Depot... but they're like $1,500 bucks for a rinky dink tool box, a HU, and some crappy speakers.

I was planning on making one sometime in the future. Don't really need one right now, seeing how all of my tools and the like are right outside my door, so I just leave my door open and play music from my PC. It's FTW.

 
Activity
No one is currently typing a reply...

About this thread

standbackimapro

10+ year member
Member
Thread starter
standbackimapro
Joined
Location
Njerz, MECP MASTER CERT, MECP BASIC CERT, ASE A6
Start date
Participants
Who Replied
Replies
14
Views
467
Last reply date
Last reply from
IDSkoT
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top