Anybody here with an rockford fosgate hx2 system in their vehicle?

[god hand 10+ year member]

I've heard a lot of good things about these subs. Anybody here with some? If so do u like them?

Click to read more...

 

[JohnBlayz142 10+ year member]

Heard a lot about them? Like how they aren't made anymore? There might be a few people on here with them still, but those subs haven't been made for years.

 

[traksta15 10+ year member]

they were good subs imo......

 

[god hand 10+ year member]

Heard a lot about them? Like how they aren't made anymore? There might be a few people on here with them still, but those subs haven't been made for years.

True but they arent hella hard to find new.

 

[ramos 5,000+ posts]

I have two pairs of the HX2's ( 1 power , 1 punch ) 3 are sitting in the closet . One of the punch has been in my brothers car for three years or so now , in 3cuft tuned to 30hz. Powered by a bd1000 at 2ohm. Too much for my old arse //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[god hand 10+ year member]

I have two pairs of the HX2's ( 1 power , 1 punch ) 3 are sitting in the closet . One of the punch has been in my brothers car for three years or so now , in 3cuft tuned to 30hz. Powered by a bd1000 at 2ohm. Too much for my old arse //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

What type of amp would I need to run 2 hx2 12's?

 

[ssj2xxgotenxx 10+ year member]

My friend is actually selling his. 12" Power Hx2 @ 1000 watts RMS, 2000 Peak. Brand new never powered.

 

[ssj2xxgotenxx 10+ year member]

DVC 2 ohm btw... shoot me a PM.

 

[Lil Poot 5,000+ posts]

that a cvr in the background? free bump for j00

 

[mike dressure 10+ year member]

punch or power. the punch hx2 in my opinion was the best sub fosgate has ever made. if using 2 of these i would use a bd1000 or if on a budget a profile ap2000.

 

[ramos 5,000+ posts]

What type of amp would I need to run 2 hx2 12's?

Punch

You would be safe with something anywhere from 400-650 watts per sub depending on the enclosure . So around 1000-1200w RMS at what ever your final impedance is //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Power

Mo power //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif They will take 1000w RMS daily . Not the most musical sub by any means , but they weren't intended to be either . For competition burps ......... a lot more depending upon several other factors //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ramos 5,000+ posts]

punch or power. the punch hx2 in my opinion was the best sub fosgate has ever made. if using 2 of these i would use a bd1000 or if on a budget a profile ap2000.

I like the punch hx2's now , but I would take some punch audiophile 12's over them anyday of the week . IMO the most musical line of subs fosgate has produced in the past 15 years. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[god hand 10+ year member]

punch or power. the punch hx2 in my opinion was the best sub fosgate has ever made. if using 2 of these i would use a bd1000 or if on a budget a profile ap2000.

Well isnt Punch hx2 a weaker sub?

 

[big_mofo 10+ year member]

Well isnt Punch hx2 a weaker sub?

its not weak, it just takes less power, but will be more than enough for you with 2 an about 1200-1400 to em

 

[god hand 10+ year member]

Punch You would be safe with something anywhere from 400-650 watts per sub depending on the enclosure . So around 1000-1200w RMS at what ever your final impedance is //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Power

Mo power //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif They will take 1000w RMS daily . Not the most musical sub by any means , but they weren't intended to be either . For competition burps ......... a lot more depending upon several other factors //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I'm looking for a amp that would power 2 of these with no problem