Anybody ever popped suspension off sub (without overpowering)

[vehementSPL 10+ year member]

I was recently pulling my 9 pioneer tsw307's out of my 4th order to switch them to my mountaineer. Well I realized the clanking I heard all this time was two of the subs had pulled the suspension away from the landing. Just curious how many other people have done the same thing. That odd thing Is I only had one kole 2400d rated 1800rms prob true 1500 rms on all 9 of them. so 160 watts each. But My only guess is when I first got them there was something weird about the box that caused the rear subs to move 1/8th of an inch and the front to move almost 2. and maybe when the susp. was stiff caused it to pull the glue by moving that far being fresh. or maybe they were just defective

Click to read more...

 

[helotaxi 5,000+ posts]

It's much easier to mechanically damage a sub in a bandpass because of the stresses that the box places on the driver. You also can't hear the signs of it distressing because the box masks them.

 

[snoopdan 5,000+ posts]

It may of just been a plain old adhesion failure of the cyanoacrylate to the landing substrate.

 

[vehementSPL 10+ year member]

Yeah. it was still surprising.

 

[JeepSound 10+ year member]

Weird.

 

[audioholic 5,000+ posts]

You grossly underpowered them, what did you expect?

j/k

 

[dragnix 5,000+ posts]

could be that the amps were severely clipping and putting out more than rated and fuxor the subs

 

[ultimate157 5,000+ posts]

It may of just been a plain old adhesion failure of the cyanoacrylate to the landing substrate.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[snoopdan 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

ya like that eh? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif