any ideas for 9910f .5ohm box

[Mr.GoodGuy 10+ year member]

i just got my hands on a D: 9910F dual 0.5 ohm going to connect to a MMATS 3000.1 and i wanna build my own box...

area i got to work with ...

W 44in X H 16in X L 12 to 20in

i talk to ppl from D: and they said to do a 40hz port ..

but i thinking of useing some where between 27hz ~ 38hz

i was really amazed from (Hawaiian Bass Head) video of his DD9510F 3.5ft^3 60in^2 port 35hz pg x600.1 amp

any feedback is welcome...

i was looking at some of these designs

Click to read more...

 

[Decado2 10+ year member]

Your going to put a single 10" in a 3.5 cube box? That thing is going to be SUPER effecient , I hope your not going to send it the full 3000 watts from your amp???

 

[Mr.GoodGuy 10+ year member]

i was thinking of give it like 2ooo or 15oo watts at 1ohm

 

[Lakota 5,000+ posts]

That box is a little on the big side...

 

[Mr.GoodGuy 10+ year member]

the first box i was thinking bout was 8 cf

 

[J31Rob 5,000+ posts]

are you a dumbass?

1.5-2 cubes & run the full 3k.

 

[Decado2 10+ year member]

the first box i was thinking bout was 8 cf

For a single 10", dude, you have to be kidding right???

I really think it would not be good for you to put a single 10" in a box that big and feed it 1500 to 2000 watts, but, its your sub //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif .

You notice, when Hawianbasshead did it, he was using a 600 watt amp right? He underpowered the sub, but used a bigger box.

From what I learned on the forums, using a bigger box will make the sub more efficient, so, you could or should use less power.

 

[04_edge 10+ year member]

troll.

 

[Lakota 5,000+ posts]

are you a dumbass?
1.5-2 cubes & run the full 3k.

//content.invisioncic.com/y282845/emoticons/imwithstupid.gif.ff72b14418b3c35ebdf1ccd38da21695.gif Once you make that box so big you're going to lose a lot of output.

 

[Mr.GoodGuy 10+ year member]

are you a dumbass?
1.5-2 cubes & run the full 3k.

so if i would do 2 cubes ..

i dont know what port to tune it too.. 40 or lower

 

[Decado2 10+ year member]

are you a dumbass?
1.5-2 cubes & run the full 3k.

What he said minus the insult //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif .

For instance, when I was running my single BL 10" of 1500 watts, I had it in a 1.25 cube ported box, it was a perfect match in my opinion.

Now i am running 2 10's in a 2 cube box off 2500 watts rms total. I really think your going to blow your sub, it would be a shame too, thats a really nice sub you have.

 

[J31Rob 5,000+ posts]

2 cubes, 40 hz.

 

[Mr.GoodGuy 10+ year member]

ok so 40hz then ...

why not lower ?

 

[Lakota 5,000+ posts]

ok so 40hz then ...why not lower ?

DD's are supposed to be tuned higher. They were designed for higher tuning.

 

[04_edge 10+ year member]

ok so 40hz then ...why not lower ?

because youll likely reach the mechanical limits of that sub playing anything much below 40hz with 3k plus on it.