Any 15"s that would like 2.5^3 ported?

[bonesninja 5,000+ posts]

i want 2 15"s ported but the best i can do is 5^3 total in a ported box....anything more than that is really pushing it.

Click to read more...

 

[mlstrass 5,000+ posts]

You "might" be able to run RL-P's in that size as I ran a pair in 2.7^3 each. How about one good sub in 4.5^3, like an HDC315? Or if you're set on 2 15's then do them sealed.

 

[Immacomputer 10+ year member]

IDQ 15s would work very well in about 2.5 each at 28-32hz.

 

[bonesninja 5,000+ posts]

You "might" be able to run RL-P's in that size as I ran a pair in 2.7^3 each. How about one good sub in 4.5^3, like an HDC315? Or if you're set on 2 15's then do them sealed.

i just had 2 15" Magnums sealed.....i definately want to go ported

 

[jmanpc 5,000+ posts]

MTX recommends 2.5 ported for the 9500s

 

[wong05tsx 10+ year member]

IDQ 15s would work very well in about 2.5 each at 28-32hz.

+1, got mine in 2.53 @ 32 sounds great

 

[bigbirney420 10+ year member]

I was told by Mike at SS that you can run a 15 in 2.5 cubes. I had size constraints but ran it sealed till I sold it.

 

[Puggsley456 10+ year member]

I run my eD 16ov.2 in 2.3net @ 29hz and it loves it. It is the sub with the smallest ported box requirements I have seen.

 

[tcguy85 10+ year member]

what about one of the Dayton 15 HO's? i'm sure they like small boxes just like the tens.

 

[Parker G 10+ year member]

LMs Ultra 2.0-3.5^3 and sound awesome

 

[jmanpc 5,000+ posts]

Oz recommends 2.5 for the Matrix Elite 15.

 

[adio 5,000+ posts]

bump for more answers

 

[animalbmx 10+ year member]

Idq!!!!!!

 

[mdillon 10+ year member]

ran on old w0 in 2.5 sealed once....once

 

[thegreatestpenn 5,000+ posts]

something doesn't sound right. I say this because port volume can vary wildly, from like 0.3cu.ft. to like 2cu.ft. depending on what kind of port and how big you want to make it. So I need to know, how did you come up with this 5cu.ft. ported number? is there a specific box you're looking at that you know fits? Did you or someone else draw up plans for a box already and that's what you came up with? gotta know these things in order to give you the best advice. Last thing I wanna see is you go out and put a sub in that ends up locking up