Another vs. thread! Tang Band, ED, and CDT!

[SuperBlack350z 10+ year member]

Alright guys, these would be in my rear deck, infinite baffle. All would be 6/6.5", so CDT M6, Tang Band W6, and EU 700 (and whatever the new model is, it's escaping me). The CDT's specifically state that they are intended for IB application and have a pretty high RMS rating. The Tangs I've heard may not do so well, and I haven't seen any feedback for the ED's regarding IB. I would either be running a JL Audio 300/4 or 450/4, depending on how much power I'd need for the subs. So, either 75w RMS or 150 RMS per woofer. What do you all think?

Click to read more...

 

[ItalynStylion 10+ year member]

I think that the CDT M6 is more of a midbass driver and which might have something to do with its suiting towards infinite baffle. I've been doing research on the other two drivers myself and it seems that the EU700's would do the job better than the Tang Bands....but thats in an enclosure, not sure with IB

I should have a pair of EU700's in a couple of days, I could let you know what I think of them though I wouldn't be able to compare them to the TB...

 

[ItalynStylion 10+ year member]

And when did 350Z's start coming with a rear deck?

 

[SuperBlack350z 10+ year member]

Haha, made the name with the last car. They'd be going in an Evo.

 

[jflash 10+ year member]

i dont think that will be enough power for the ed subs. i just got mine last week. in a small sealed box it took 300w/rms no problem. i only bought one to test out and was suprised how good it sounded.