Amplifier installation accesssories

[Trancer 10+ year member]

Hey guys, I need to install my friends stereo. I had him get 1/0awg wiring cable so he needs everything else to install his two amps.

I'm needing:

2 sets of RCA's (between 2 ft - 6 ft) Preferably a 3 channel (video RCA) would be nice since the subwoofer out from the Rockford 3Sixty.1 is only one channel.

2 Distro blocks: (2) 1/0 awg in/out and a 4ga

Battery terminals: (2) 1/0 awg and (2) 4 or 8ga

8ga wire for his subs

250-300a Circuit Breaker or Fuse Holder with fuses

Prefer to get it all from once place. Used and new is welcome. He's on a budget

Click to read more...

 

[fasfocus00 5,000+ posts]

I have a RF distro, 1 0 gauge in 3 4gauge out. got battery terminals that have screw on top to accept ring terminals and 2 slots underneath to take 2 8 gauge. also got 10 gauge speaker wire. I can do the distro, 2 battery terminals, and 20ft of speaker wire for $30 shipped.

 

[mylows10 5,000+ posts]

i got a 0 to 2- 4 gauge digital fuse block ,also have stinger 8 gauge wire new 300 amp anl fuse ,only rcas i have are 20 fosgates double twisted 15.00 each and 2 single monster rcas pro series 2 ft long each 5.00 each,fuse block 30 with fuse and the wire would depend on how much you need .plus shipping

 

[Trancer 10+ year member]

Thanks, but I need more 1/0awg than that for the distro blocks and battery terminals.

Let me explain what I got going on.

I need a two 1/0 awg on the distro blocks and the battery terminals. Will be running 1/0 wire down to a distro block and from the distro block, will be running 1/0awg to an MB Quart 2000D (2000+ wrms) and 8 guage to an Eclipse 2000D (150wrms x 2)

Will be doing the Big 3 Upgrade so I need a battery terminal that will run 1/0awg to the rear of the truck for the amps, 1/0awg to the alternator and a pair of 8 ga (or 4ga) for factory wiring.

 

[mylows10 5,000+ posts]

buy some copper bars and make what you need or send an email to tool maker he can make the distros that you need

 

[Trancer 10+ year member]

I think it would be alot easier just to buy some distribution blocks...........

Plus I don't have a drill press