amp tuning, shops closed???

[headtrnr 10+ year member]

hey guys since it's sunday and shops are closed i want get my stuff up and running. i have a 12" 05 type r in 2.0 CF ported box tuned to 32hz, i'm running it off of a phoenix gold octane r 8.0.1, i am running my factory deck with a LOC made for a sub (that gain is turned up to max, behind my radio) so what do i tune my amp to. i know bass gain is a personal prefernce but what about my sens gain and my others(Built-in Crossover LP (30 - 300Hz), Subsonic (20 - 55Hz) and also there's a switch that says [config out] with 3 different settings (Here's a web site click on the amp and it will show the side that has all the different gains)http://www.sonicelectronix.com/item_1491.html#. Also when i move my bass on the stock deck it will affect the sub (sort of like a gain) i know this because i tested a sub when i put all my wiring in.

thanks alot guys.

Click to read more...

 

[iceteebone 5,000+ posts]

the sensitivity/gain read the gain setting tutorial. that is used to match the output voltage from your headunit

just don't use bass boost. if you must use very little.

subsonic should be set at about 30 hz. since you are running a ported enclosure.

low-pass filter should be set anywhere between 70-80 hz.

 

[djman37 5,000+ posts]

BASS BOOST=BAD

BTW, today was SATURDAY wasn't it?