Amp that does 100x2 @ 8 Ohms

[BigSix 10+ year member]

Trying to power two 8 ohm midbass woofers, or maybe a 400x1 at4 ohm might work if I cant find what im looking for.... Looking for a quality and reliable amp no junk.....

Click to read more...

 

[RAM_Designs 5,000+ posts]

A two channel that can do that is going to be a lot more expensive than a four channel that can do that bridged. And with the four channel you can get a lot more than 2x100 at 8ohms so you can have plenty of headroom for dynamic passages.

What's your budget? Even just $100 can get you some good used equipment on here or ebay.

 

[hrtbrk1 5,000+ posts]

sax 125.2

sax 100.4

 

[BigSix 10+ year member]

A two channel that can do that is going to be a lot more expensive than a four channel that can do that bridged. And with the four channel you can get a lot more than 2x100 at 8ohms so you can have plenty of headroom for dynamic passages.
What's your budget? Even just $100 can get you some good used equipment on here or ebay.

100 to 150

 

[RAM_Designs 5,000+ posts]

100 to 150

New or used?

 

[hrtbrk1 5,000+ posts]

i think autotek has some too but the model number slipped my mind

 

[BigSix 10+ year member]

New or used?

doesnt matter

 

[BigSix 10+ year member]

would it better better to run them 200x1 at 4 ohms?

 

[hrtbrk1 5,000+ posts]

ppi a404

 

[hrtbrk1 5,000+ posts]

http://www.precisionpower.com/Manuals/Amplifier%20Manuals/Precision_Power_Art%20Series%20A204,%20A404,%20AX400%20Amplifiers.pdf

 

[BigSix 10+ year member]

http://www.precisionpower.com/Manuals/Amplifier%20Manuals/Precision_Power_Art%20Series%20A204,%20A404,%20AX400%20Amplifiers.pdf

i dont think that will work i need 200x1 at 4ohm not 200x2 at 4ohm.....

 

[RAM_Designs 5,000+ posts]

US Acoustics USX 4065 amplifier - eBay (item 180591233576 end time Feb-20-11 23:24:24 PST)

MTX Thunder 6304 - 4 channel AMP - eBay (item 300520170186 end time Feb-04-11 13:56:16 PST)

US Acoustics USX 4085 amplifier - eBay (item 180591234140 end time Feb-20-11 23:28:47 PST)

Kenwood KAC-X501F Car Amplifier - eBay (item 230580284483 end time Feb-06-11 15:43:18 PST)

If you want to go up to $150 you can get some new amps that'll work as well. I also just checked BIN stuff. If you check out for auctions you can get stuff really cheap sometimes.

 

[hrtbrk1 5,000+ posts]

i was thinking of the 100x2 at 8 ohm

 

[RAM_Designs 5,000+ posts]

would it better better to run them 200x1 at 4 ohms?

If they're playing midbass, and they're up front, no. You want different channels for L and R midbass.

 

[BigSix 10+ year member]

so i would hook one speaker to two channels?