Amp problems!

  • 4
    Participant count
  • Participant list

Corsica
5,000+ posts

CarAudio.com Veteran
I now am owning 2 old "barbque" style RF amps. One is a 75.2 and the other is 150A2. The

150A2 has 2 plastic pices one one side. On that side there are like 4 or 5 of them an the same amt. on the other side. I wanna fix tyhis. How would I go about this? My 75.2 has no burn marks except where the remote spade would slide on. How would I fix this spade? Is it possible to solder this to the board? I am in need of ideas cause I'm not in too much of a hurry to pay Fosgate 200 dollars to fix both amps. Anyways please give me some ideas.

J

 
I don't think anyone knows exactly what you are talking about! What are "plastic pieces"?

Why are there burn marks on the remote connect? Sounds to me like you have shorted something out! Maybe u can explain what u mean a little better and you'll get a better opinion!//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
If you're not an electronics technician with the propper test equipment, replacement parts, and a schematic diagram of the amp, you're kidding yourself if you think you can fix a smoked amp yourself. Maybe something simple like a broken terminal but beyond that.. no.

Those "plastic things" are power transistors.

Heed the warning label.. "No user serviceable parts inside. Refer all servicing to authorized service personnel".

 
Originally posted by maylar If you're not an electronics technician with the propper test equipment, replacement parts, and a schematic diagram of the amp, you're kidding yourself if you think you can fix a smoked amp yourself.

Those "plastic things" are power transistors.
Ohhhh! I didn't realize he was messing with the circuit board!//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif Just buy another amp and forget it!//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif
 
Sorry i ain't posted in a while. Buying new **** is easier said than done, and its a challenge for me to try this **** so wanna offer some suggestions?

 
There is a great repair place in atlanta called high-end car audio repair center their address is 1919 metropolitan ave atlanta Ga. 30315 they have very fast and precise service i highly recommend them. their # is 404-763-2005 or 770-473-6556

AUDIOPHILE4LIFE

ps their prices are great !!!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
137
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
317
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
313
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
372

About this thread

Corsica

5,000+ posts
CarAudio.com Veteran
Thread starter
Corsica
Joined
Location
Ft Huachuca, AZ
Start date
Participants
Who Replied
Replies
5
Views
658
Last reply date
Last reply from
audiophile4life
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top