Amp problems

[bmk6795 10+ year member]

So i had my amp hooked up in my backseat temporarily for a couple days, everything worked fine. I unhooked all the wires moved the amp back approximately a foot, hide the wires, and now it wont turn on. Anyone got any ideas as to why? The power wire has power, the ground is fine, the rcas are ok. I assumed the remote is fine but i dont have another amp to test it on. It could be that there is just no output but i checked and rechecked the speaker wires and they are hooked up right. Im puzzled as to what happened, any help is appreciated. Thanks.

Click to read more...

 

[Side Show 10+ year member]

backseat went flat? try charging it back up or hook it back up the way you had it and see if it works, if not check fuses and grnd and pwr wires

 

[bmk6795 10+ year member]

fuses, ground, and power wires are fine. I found the problem but i dont know why it is a problem. The speaker terminals have no output, reading .4 volts on the multimeter with the gains in the same exact spot as they were before, turning the gain up or down has no effect on output. Any idea why the speaker terminals have no output now? i didnt drop, beat, bang, the amp or anything, literally picked it up, and put it in the trunk. Any opinions?

 

[bmk6795 10+ year member]

bumpp

 

[bmk6795 10+ year member]

Problem solved thanks guys

 

[Side Show 10+ year member]

was it your rca's? in the output section of your amp and not in the input section?