amp problems plz help

[Rainelli 10+ year member]

So I have a kicker zx1500.1 I was running 2 15 kicker comps blew one no big deal but I took em out and a few days later went to hook up a did sub and the amp didn't turn on. I haven't had to much time to look at it but any suggestions on what it might be

Click to read more...

 

[mylows10 5,000+ posts]

check all power and ground wires ,check voltage at the power and remote wires ,make sure its at least 12 volts.just for starters

 

[Rainelli 10+ year member]

Just checked all fuses,power,ground, and remote. Everything seems fine

 

[mylows10 5,000+ posts]

did you check voltage also check the ground wire

 

[Rainelli 10+ year member]

I don't have anything on hand to check the voltage. And the ground seems fine as well. It was all fine then I blew the sub so I went a cpl days without using it and now I got nothing

 

[Rainelli 10+ year member]

Im tripping right now cuz I jus ordered my fi and imma be pissed if I don't have an amp to run it.

 

[mylows10 5,000+ posts]

go to home depot tomorrow and get a multi meter to check continuity of the ground and power wires. i might just be a fuse tho

 

[Rainelli 10+ year member]

Ok I messed with the remote a lil more and if I moved it right the amp made a clicking noise but never fully cut on I switched out the remote and still nothing

 

[mylows10 5,000+ posts]

still need to find what the voltage is ,not much you can do until you know

 

[Rainelli 10+ year member]

Ten 4. Ill let ya know somethin tomorrow

 

[mylows10 5,000+ posts]

once you know what voltage is then we can start the trouble shooting

 

[I Like Waffle]

exactly //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[stl_314 10+ year member]

Jump a wire from the positive wire to tge remote in.

 

[mylows10 5,000+ posts]

yea you can try that ,that will tell you if the remote wire is bad if you have good power and ground