Amp for rainbow SLC 265's

AcesHigh
10+ year member

Member
What are your suggestions for an amp to push these.

I currently have a Kicker zx200.2, but it only puts out 70wattsx2@4ohms. Actually probably a little more since they are underrated.

I've read that I should give these 100 to 125 watts per side. I'd like to stay under $200, but if I'm going to sacrifice SQ, I'll spend more.

 
You might be able to find a PG Xenon 200.2 for under $200.

Used JL 300/2s go for a little over $200 I think. I have a JL 300/4 on my Rainbows and they sound awesome.

 
Get this US Amps xt-800.2 amp. You can set the gains low and give the speakers about 100w each side. I used to have that setting, and they sounded great. Then later, you'll have headroom if you want to upgrade, or go with a 3-way setup.

Snag this, because this guy's amps have been selling good. FWIW, this guy bought the amps off his friend who was going to be a distrubutor, but wound up not doing so. I also talked with some people he sold to who said the amps they got were in the box with plastic sealant around them still. I was going to buy one of his 1600.4 amps, but he sold it while I was out. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Anyway, don't pass this up. You'll be VERY hardpressed to find a deal remotely this good. Seriously.

xt-8002.jpg


 
i'm using the US Amps XT1600.4 (100x4@4ohms) to power the SLC265s up front and some 6.5" subs on the back and i'm perfectly happy with it. That looks like a killer price for the XT800.2 posted above. If i didn't have anything to power in the rear, i'd probably get it myself.

 
There are lots of 4 channel options that will do the power you want when bridged, and then that would leave the door open for going active if you chose to later on.

 
^^

Can't believe I didn't think to suggest that. I just got so caught up in that amp being such a steal, lol.

Yes, I agree. Get a 4-channel so you won't be kicking yourself later.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

AcesHigh

10+ year member
Member
Thread starter
AcesHigh
Joined
Location
Northern Virginia
Start date
Participants
Who Replied
Replies
8
Views
950
Last reply date
Last reply from
bikinpunk
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top