Amp doesn’t seem to be getting power

john9721

Junior Member
Looking for some suggestions or help, working on a Hifonics 1200 watt amp; was working fine until a few days ago, now won’t get power. The blue “Hifonics” letters light up very dim, not like normal, but the power light on the amp doesn’t come on. Checked power, ground and remote turn on wire, and also the fuse on the power wire and all check out fine. Any suggestions? Also, pulled the 70A fuse out from the amp. Doesn’t appear broken on the inside but both blades have brownish/blackish coating on it, almost looks burnt. Any path there? Thanks!

 
Looking for some suggestions or help, working on a Hifonics 1200 watt amp; was working fine until a few days ago, now won’t get power. The blue “Hifonics” letters light up very dim, not like normal, but the power light on the amp doesn’t come on. Checked power, ground and remote turn on wire, and also the fuse on the power wire and all check out fine. Any suggestions? Also, pulled the 70A fuse out from the amp. Doesn’t appear broken on the inside but both blades have brownish/blackish coating on it, almost looks burnt. Any path there? Thanks!
replace fuse 1st

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

john9721

Junior Member
Thread starter
john9721
Joined
Location
Ankeny, IA
Start date
Participants
Who Replied
Replies
3
Views
624
Last reply date
Last reply from
Boomin_tahoe
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top