Amp cuts in and out???

[mendon mafia 10+ year member]

so i have ant at3000.1d sub amp and when i bump really hard or hit bumps in the road it cuts out sometimes. When i jiggle the rca's it comes back on. Im not sure if the issue is between the interface of the cable and the amp or if internally the rcas on the amp is loose.

anyone have any experience with this and know how to remedy it?

Click to read more...

 

[phemps 10+ year member]

well start by trying new rcas thats the cheapest thing to start with.

 

[mendon mafia 10+ year member]

well start by trying new rcas thats the cheapest thing to start with.

i already did that. i have 2 sets ran from when i had two amps.

 

[djarmy2004 10+ year member]

Change out the RCA's If that dont work I'd say possibly HU or the amp inputs. GL with the fix

 

[phemps 10+ year member]

i already did that. i have 2 sets ran from when i had two amps.

hmm well then its sounds like it may be something internal, headunit or amp inputs. if you can try a spare headunit or amp that would eliminate those as issues. one of those is probably it

 

[mendon mafia 10+ year member]

must be the amp //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif. **** intermittent problems.