Amp advice for single sub

[fireX02 10+ year member]

What is a decent quality amp that is inexpensive, relatively, to power a single 10" pioneer sub in a small custom sealed enclosure, that will be coming from my factory HU? Also, can someone briefly explain how to add this amp to my factory HU to power only the sub. I'm running 3-way 6x8's in all four doors, that should be adequate with the factory preamp in the HU. Thanx.

Click to read more...

 

[cappy72 10+ year member]

you are going to need a line out convertor, which will take the signal from one set of speakers and input that into the amplifier for the sub.

give us more specifics on the sub, like what the rms rating is and what your budget is...

 

[fireX02 10+ year member]

Not real sure what the rms wattage on it , but the max wattage is 500. The model # is TS-W250R. I'd like to stay under $100 for an amp.

 

[denim 5,000+ posts]

http://www.cardomain.com/item/INFREF7520A

http://www.cardomain.com/item/MTX282

http://www.cardomain.com/item/PIOGM5100T

http://www.cardomain.com/item/ROC4FRP2002

 

[gnet158 10+ year member]

I've heard good things about profile, check thier web site for referbs or E-bay. I will be running the CA400M pretty soon. You should be able to pick on up for under $100 shipped.

 

[jsloan10 10+ year member]

http://www.cardomain.com/item/INFREF7520Ahttp://www.cardomain.com/item/MTX282

http://www.cardomain.com/item/PIOGM5100T

http://www.cardomain.com/item/ROC4FRP2002

What no Kenwood???,

Some amps have a line level input built in (like the kenwoods) which will make the line ouput converter unessesary, look for that while your shopping around.

Look for something with 150 to 250 watts rms bridged at 4ohms.

 

[denim 5,000+ posts]

What no Kenwood???,
Some amps have a line level input built in (like the kenwoods) which will make the line ouput converter unessesary, look for that while your shopping around.

Look for something with 150 to 250 watts rms bridged at 4ohms.

kenwood has sorta fallen out of the top of the game IMO, all of those amplifers fit yourpower and are very close to your cost needs