am i being stupid or really smart???

[mattintc 10+ year member]

and maybe 2 15's or even if i get enough money 2 18's idk what do you guys think i should do for a different subwoofer?? this is something i wont tell you wrong on just say your opinions

 

[mattintc 10+ year member]

haha i dont understand why people say thats a mess thats pretty **** organized compared to the OEM wires that come out of the power supplys but i mean look at people insane setups and the amount of wire behind it trust me im pretty organized and no electrical tape here just lots and lots of heat shrink tubing and solder

 

[O.G. D-Wet 10+ year member]

people might not hide all their wires but dude, if ur just sloppy by nature, most things u do will reflect that.

 

[mattintc 10+ year member]

true if you look in my most popular video VR3 excursion test youl see that i tried my best to hide the wires poor wires but what the hell it was my very first one without any experiance and about a year or 2 ago

 

[SSS 18734 5,000+ posts]

If you don't have much to spend, why don't you just get a few Behringer EP2500's? They're SR amps, but produce tons of power and barely cost anything.

 

[supermaxx123 10+ year member]

I use a somewhat similar set-up for my subwoofer in my living room, but i use one power supply and it's all hidden. I have the power supply switched to a regular light switch. its a dd audio 1512 in a transmission line and it shakes the house. plays down to 20hz really nice. going to be building some tlines as towers for my mains. After a while i'm sure you'll get over how weird your set-up looks. if you like it, more power to you.

 

[mattintc 10+ year member]

haha there still expensive for some one poor like me haha

 

[obrien202 10+ year member]

I kind of wanna break ur nose for making that I hope ur house burns down do things right and listen to people WTF man and I agree a sloppy lifestyle leads to sloppy install let people speak or ur either going to get hurt or burn your I mean ur parents house down u might be grounded

 

[mattintc 10+ year member]

no i just look at it and then look at the blisters on my hands from trying to cut the four gauge with shitty cutters and go **** that was alot of work and how many times i burned my self with the rosen from the solder on the terminals to my buss bars and think to my self well that was well worth all the work. but i wish i had enough determination to build a T line thatd be so awesome.

 

[mattintc 10+ year member]

haha okay keep telling your self all that i did a sloppy job im not going to listen either really just for the fact iv been in this for 2 or 3 years and never had a problem once //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif when it burns up il come on this forum and make a topic of saying well shit people were right and it happend. but as of now that wont happend

 

[O.G. D-Wet 10+ year member]

idk, its YOUR room so I wouldnt worry too much about presentation but just try to keep ur wires out of harms way so nothing snags them etc. And if shorted shit out in the past, u shud make sure to avoid that this time. Idk, this is common sense. Id just hate a fellow audio enthusiast burn his house down over a careless setup, u know?

 

[mattintc 10+ year member]

haha yeah i know thats why i keep my power supplys away from each other cause when they touch they shut down and it gets a bit anoying but if i keep em away from each other it wont short

 

[supermaxx123 10+ year member]

haha okay keep telling your self all that i did a sloppy job im not going to listen either really just for the fact iv been in this for 2 or 3 years and never had a problem once //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif when it burns up il come on this forum and make a topic of saying well shit people were right and it happend. but as of now that wont happend

2-3 years sounds like determination to me.

 

[mattintc 10+ year member]

2-3 years of mistakes learning experiances and different ideas