Ive been thinking about selling this amp as the sub that i really want to go with needs more power then this one can produce. This amp has never been used and has been sitting in my closet for over a year now. It still has all manuals, birth certificate, and even the factory clear stickers over the display so you know it hasnt been scratched. Also comes with the mount for the amp. Rated at 1000 X 1 and 1800 max. The birth certificate is 1183 watts,
http://www.analogstereo.com/cassette_deck_...e_mrd_m1000.htm
also comes in original packaging, although the box is a little messed up from moving.
Specs:
Alpine MRD M1000 Bass Engine
* Crossover Type : 24dB/Octave Slope - Digital
* Low Pass Crossover Frequency (Selectable) : 30Hz - 200Hz (1/12 oct. Steps)
* Subsonic Filter Range : 15Hz - 50Hz (5Hz Steps) or OFF, 24dB/octave Slope
* Subwoofer Phase Control : Normal (0) or Reverse (180)
Alpine MRD M1000 General-Amplifiers
* Frequency Reponse : 10Hz-500Hz (+0, -1dB)
* Heat Sink w/Cover (WxHxD)in : 13" x 2-5/16" x 8-11/16"
* Heat Sink w/Cover (WxHxD)mm : 330mm x 60mm x 220mm
* Input Impedance : 100k ohm
* Input Sensitivity (for rated power) : 0.1V to 8.0V
* Signal to Noise (S/N) : 90dBA (referenced to rated power)
* Speaker Impedance : 4 or 2 ohms (Mono)
* Weight (lbs) : 5.0kg.
Alpine MRD M1000 RMS Power (at 12V,20Hz-200Hz)
* Per channel into 2 ohms : 700W x 1
* Per channel into 4 ohms : 500W x 1
RMS Power (at 14.4V,20Hz-200Hz)
* Per channel into 2 ohms : 1000W x 1 (1% THD)
AMP HAS NEVER BEEN USED, NEVER EVEN HOOKED UP!!!
I know im new to this forum, but i do have a Ebay username. lilchard1969
im also on a few other forums, for one explorerx.com
anyway, im gonna say 450 shipped since i have to state a price, but im open to any reasonable offers. Remember, brand new amp.
http://www.analogstereo.com/cassette_deck_...e_mrd_m1000.htm
also comes in original packaging, although the box is a little messed up from moving.
Specs:
Alpine MRD M1000 Bass Engine
* Crossover Type : 24dB/Octave Slope - Digital
* Low Pass Crossover Frequency (Selectable) : 30Hz - 200Hz (1/12 oct. Steps)
* Subsonic Filter Range : 15Hz - 50Hz (5Hz Steps) or OFF, 24dB/octave Slope
* Subwoofer Phase Control : Normal (0) or Reverse (180)
Alpine MRD M1000 General-Amplifiers
* Frequency Reponse : 10Hz-500Hz (+0, -1dB)
* Heat Sink w/Cover (WxHxD)in : 13" x 2-5/16" x 8-11/16"
* Heat Sink w/Cover (WxHxD)mm : 330mm x 60mm x 220mm
* Input Impedance : 100k ohm
* Input Sensitivity (for rated power) : 0.1V to 8.0V
* Signal to Noise (S/N) : 90dBA (referenced to rated power)
* Speaker Impedance : 4 or 2 ohms (Mono)
* Weight (lbs) : 5.0kg.
Alpine MRD M1000 RMS Power (at 12V,20Hz-200Hz)
* Per channel into 2 ohms : 700W x 1
* Per channel into 4 ohms : 500W x 1
RMS Power (at 14.4V,20Hz-200Hz)
* Per channel into 2 ohms : 1000W x 1 (1% THD)
AMP HAS NEVER BEEN USED, NEVER EVEN HOOKED UP!!!
I know im new to this forum, but i do have a Ebay username. lilchard1969
im also on a few other forums, for one explorerx.com
anyway, im gonna say 450 shipped since i have to state a price, but im open to any reasonable offers. Remember, brand new amp.
