Alpine CD ChangerQuestion

[nateberrier 10+ year member]

Im not sure if Im an idiot or what but I have a 6 disk changer connected to my 9855, plays fine but I cannot for the life of me figure out how to manually change disks. The only way to change atm is to play out the last track on the current disk, i have pushed every button lulz

Click to read more...

 

[nateberrier 10+ year member]

nvm rtfm ftl

 

[pickup1 5,000+ posts]

Select a disc (1 to 6) or (1 to 12) by touching the

GlideTouch bar and sliding your finger to the left

or right. Press the GlideTouch bar under the

desired disc.

The selected disc number appears in the display and CD

playback starts

 

[Rich B 5,000+ posts]

1 Press SOURCE/POWER to activate the CHANGER

mode.

The display shows the disc number and track number.

• The source indicator varies depending on the connected source.

2 Press FUNC. to activate the direct disc recall

mode.

Source selection mode . Audio function mode . Direct disc

recall mode . Source operation mode* . Source selection

mode

* CDA-9855 only

3 Select a disc (1 to 6) or (1 to 12) by touching the

GlideTouch bar and sliding your finger to the left

or right. Press the GlideTouch bar under the

desired disc.

The selected disc number appears in the display and CD

playback starts.

• After selecting the desired disc, you can operate in the same way as

for the CD player of this unit.

For details, please see the CD/MP3/WMA section.

Pg. 38 in the .pdf manual-

http://a248.e.akamai.net/pix.crutchfield.com/manuals/500/500cda9853.pdf