Almost there....

[Nikuk 5,000+ posts]

Last couple days project... hopefully be on the sensor next weekend:

//content.invisioncic.com/y282845/emoticons/veryexcited.gif.c26a15f316d23068607f36ddacd7a7ab.gif

Click to read more...

 

[DBfan187 5,000+ posts]

www.imageshack.us - free, just post the first link it gives you back here

 

[Nikuk 5,000+ posts]

www.imageshack.us - free, just post the first link it gives you back here

yah, thats where i put it but it was annoyingly big. resized it, reposted it... good to go thnaks!

 

[DBfan187 5,000+ posts]

Cool!

What is for?

size?

tuning?

 

[InhumanAcura 5,000+ posts]

You planning on bracing it at all? What s going in it?

It looks like you could run a piece of 5/8" allthread right between the subs closest to the port and the one furthest away...Something that will stop it from flexing top to bottom as well....

 

[Nikuk 5,000+ posts]

What is for? Some "UsedToBeDecentSubsButNoOneLikesThemMuchAnymore,BesidesIGotThemPrettyCheap" 12's

size? 11 cu ft net w/ 160 sq in port

tuning? 43 with a plug for 32 (80sq ins port)

okay... i'll post this pic but two things:

1.) I'm ~6'1", the box is 3'9" on end

2.) hey, i got those subs for $60 each....

Yah, bracing is "hidden" or discreet. gonna get a double wall all round for it goes in, hence "almost done". ideally keeping the flow from the dirvers free....

 

[Nikuk 5,000+ posts]

It looks like you could run a piece of 5/8" allthread right between ....

exactly right //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

also, double wall going on. just wanted to get it together... got a bunch of other crap to attend this weekend.

*edit* already have 9 rounded off corner/midwall braces inthere. What we call "eliptical triangles" in the central points of each face...

 

[DBfan187 5,000+ posts]

LOUD & PROUD!

Just the way I like it!//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Nikuk 5,000+ posts]

oh yah, it's standing on end on top of some scrap so any excess gorilla glue can run off as it expands (without gluing itself tothe floor), at the moment. will be tested laying on its back (up firing) as well as front firing (wall-ish).

 

[Nikuk 5,000+ posts]

problem is, i might be selling the amp i was planning on using right away... hmmmmmm

BTW - old setup still for sale! Stroker 18"

Hit 156 on old AC....