Aeros Firing into cabin..

[GetLikeMe 10+ year member]

Well I planned to run 4 4" Aero ports firing out the side of my box (Since my box is going to be slammed against the back of my trunk) But come to find out the aero flares are 7.25" and my box is only 28" wide.. So I either only use 3 4" aeros not sure if thats going to be enough port or I can fire all 4 into the cabin. Whats your guy take on firing into cabin?

Click to read more...

 

[GetLikeMe 10+ year member]

any input

 

[spltuscon 10+ year member]

Facing them into the cabin almost always results in a big loss (of db's) unless its sealed off. Can you make the box a few inches narrower and mount them facing the drivers side?

I have very good results with trunk boxes laid out that way.

Other option might be keep your same idea, but switch to (2) 6" aeros. (3) 4" isn't enough port area.

 

[GetLikeMe 10+ year member]

How many incches away from the rear of the trunk do you guys recommend for firing back?

 

[Millertime1028 10+ year member]

About 3-4 inches would be the minimum in your situation, although sometimes you will see a gain when the ports preloaded as a result of them being closer then normal to the rear. Test and see what works for your specific car.

 

[GetLikeMe 10+ year member]

Cuz its like almost impossible to fire them out the side since my side is 25" and the cutout for each 4" port is 6.25 lol so do the math lol..

But i do have about 3-5inches from the box to the back of the trunk. Im thinkin jus saying **** it and fire them back!

 

[spltuscon 10+ year member]

That should be fine

 

[jshak07 10+ year member]

the outside cutouts make them all the way up against the side baffle and let the flare sort of over lap the side baffle. Just be sure to seal the flare real good

 

[GetLikeMe 10+ year member]

I think ima just fire them back. My front and back walls are double layer so ill cut thru the first wall and mount on 2nd wall. So that wil add another 3/4.. Well see i get aeros today.