I know this question has been asked about a billion times but forgive me as I've searched and searched and still cannot find a definitive answer for my situation. I know that with an aero u can cheat port area and I suspect too much port would cause unloading issues. Im building this time for 4 Sundown E8v3s on my Ab ph4000(tad under 2k). I have modeled the subs and found a liking to 2.5cubes at 39hz but heres my question. "Will two 4in Aeros be too much, enough to cause any suspected unloading or any other issues?" The way I see it, thats 10in per cube. These subs are rather beasty and boast 12mm xmas so I wonder if a lil more port would hurt or affect overall output? Below are the T/S specs. Thanks for ur time and any opinions.
300 watts RMS
Re: 6.29 ohms
Fs: 51.9 Hz
Qes: 0.61
Qms: 3.39
Qts: 0.52
Le: 3.88 mH
Vas: 5.11 L
BL: 18.47 NA
Mms: 102 g
Cms: 91.9 uM/N
Sens: 82.42 dB 1w/1m
Bl^2/Re: 54.25
Xmax : 12mm one-way 70% BL
DEPTH = 5.118"
Suggested Box = 0.5 to 0.75 ported tuned to 35 Hz
