i have access to two RTA's so I don't need to do all the uploading stuff.//content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gifjntars RTAs?
Please go into detail. There might not be an audible difference when running both unbalanced, but literally every single person I talk to who has ran both notices a difference between the 16v balanced and 8v unbalanced, including FoxPro5 on here, to whom I just sold my balanced line adapter for his 8053.There's no audible difference between preout voltages.
What it does is lower your overall noise floor. But it doesn't affect SQ at all. If you don't have any noise problems with 8volts then you won't need 16volts. The biggest differences you'd see would be the fact that your gains on your amps would be lower than if you used 8volts.Please go into detail. There might not be an audible difference when running both unbalanced, but literally every single person I talk to who has ran both notices a difference between the 16v balanced and 8v unbalanced, including FoxPro5 on here, to whom I just sold my balanced line adapter for his 8053.
Two completely different things.Please go into detail. There might not be an audible difference when running both unbalanced, but literally every single person I talk to who has ran both notices a difference between the 16v balanced and 8v unbalanced, including FoxPro5 on here, to whom I just sold my balanced line adapter for his 8053.
The signal out of the BLA is dropped down to 8V or 10V (can't remember off hand). It's only 16V into the BLA from the 8053But how many amps can handle such a high voltage signal?? I'm not going to claim to know but I don't think there are many unless after the BLA the signal goes down in voltage.
Ok, so at this point then it is an unbalanced signal and is fed to the amps as that??The signal out of the BLA is dropped down to 8V or 10V (can't remember off hand). It's only 16V into the BLA from the 8053
Yup.Ok, so at this point then it is an unbalanced signal and is fed to the amps as that??
The "A" in BLA stands for adapter. All amps could then take advantage of the balanced signal.What it does is lower your overall noise floor. But it doesn't affect SQ at all. If you don't have any noise problems with 8volts then you won't need 16volts. The biggest differences you'd see would be the fact that your gains on your amps would be lower than if you used 8volts.
But how many amps can handle such a high voltage signal?? I'm not going to claim to know but I don't think there are many unless after the BLA the signal goes down in voltage.