gotta contact a dealer. Check their site for your local dealer rep...
x2, good subs ran the originals for about a year, got loud ,decently low, but I was using the recommeded sealed box. Porting them brings out the beast in them.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
- Thread Starter
- #4
well i'm only working with about 2.5 cubes sealed...in a single cab truck....what amp would yall recommend running them on?
taking from here, http://ascendantaudio.com/assasin.php
There RMS is less than it use to be, but from what I here, they are still good subs. You have enough room for (2) 10s sealed or a single 12" ported. If you could squeeze out a lil more room you could port the 10s and get more output and low end out of them.
Something that does around 500w RMS to the pair should be good or half that for a single driver.
There RMS is less than it use to be, but from what I here, they are still good subs. You have enough room for (2) 10s sealed or a single 12" ported. If you could squeeze out a lil more room you could port the 10s and get more output and low end out of them.
Something that does around 500w RMS to the pair should be good or half that for a single driver.
(4) 8"s ported would work well too, as seen here,
Activity
No one is currently typing a reply...
Similar threads
- Started by WNCTracker
- Amplifiers
- Started by Adgey9
- General Car Audio 2
About this thread
