9887 Internal Amp

[avinar 10+ year member]

May the internal amp outputs of this HU be bridged?

Click to read more...

 

[zack39648 10+ year member]

no i would advise against it unless you want to blow your preamp .. why would you want to bridge them .. trying to get more power to 1 set of speakers ???

 

[blackbonnie 5,000+ posts]

simple answer. no, leave it at that, no reason to ever do that. you will blow your internal amp as the impedence it is at is the lowest it will go. if you wanna run more power to your speakers, amp them

 

[avinar 10+ year member]

I'm not going to bridge the preamps, but just the amp outputs for using with Alpine SBS-05DC!

 

[blackbonnie 5,000+ posts]

do you mean the rca's?

 

[ultimate157 5,000+ posts]

No, do not bridge the channels unless you want to fry your HU.

 

[jdc753 10+ year member]

//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif

Don't do it unless ya wanna screw things up.

 

[skadude016 5,000+ posts]

go for it! see what happens //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Fusion_FREAK 10+ year member]

Give me the 9887, and I'll give you this old *** 9803 I have sitting here. This way, when you blow it, it will only be a cheap radio.

 

[bumpin buick 5,000+ posts]

do it, lets see what happens

 

[avinar 10+ year member]

No, not the RCAs!

 

[ruel1977 10+ year member]

so what do you mean you want to bridge?.. if you want a high output from ur head unit get a line driver!!!

 

[ultimate157 5,000+ posts]

so what do you mean you want to bridge?.. if you want a high output from ur head unit get a line driver!!!

Umm... No.

Line driver is used for boosting the signal voltage of an RCA.

 

[memphis_vette 10+ year member]

biches running wild