Sold 9510F recone kit: dual 2

[tommyk90 5,000+ posts]

I have a brand new recone kit for a 9510 f motor with dual 2 ohm coils.

Standard spider pack. It is built for the newer 12 spoke basket. (I will sell the basket with the recone for $25, same price as DD)

New from DD these run $85 + shipping.

$70 + shipping.

Pics in a bit.

Click to read more...

 

[tommyk90 5,000+ posts]

 

[Jayzbent 10+ year member]

I wish this was a 12" recone. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[tommyk90 5,000+ posts]

I wish this was a 12" recone. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Sorry, I used my 12" recone to turn the 9510 into a 9512. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[aho77 10+ year member]

so u got the basket for the 10 i got a moter that will work

 

[tommyk90 5,000+ posts]

so u got the basket for the 10 i got a moter that will work

Yes, I do have the basket as well. Brand new.

If you want the basket I will sell it for the same price that DD charges, $25.

 

[tommyk90 5,000+ posts]

Next day bump.

 

[tommyk90 5,000+ posts]

Anybody?

 

[tommyk90 5,000+ posts]

$90+shipping for basket and recone?

That's $20 less than getting them from DD.

 

[Redgp 10+ year member]

whats the difference between the f and the g series. I have a 9512G that i want to turn into a 10. how much shipped to 85706

 

[tommyk90 5,000+ posts]

whats the difference between the f and the g series. I have a 9512G that i want to turn into a 10. how much shipped to 85706

Different motors.

I highly doubt this recone would work. You can call DD and ask them.

 

[stewie 10+ year member]

the G motor gap is different then the f motor the coil for the g too thick for the f motor we tried it when one of my motors got shifted wont work

 

[resko1 10+ year member]

You got dimensions on the coil? Inner diameter, outer diameter, and coil winding height? Im wondering if this would work in a motor i have.

 

[tommyk90 5,000+ posts]

You got dimensions on the coil? Inner diameter, outer diameter, and coil winding height? Im wondering if this would work in a motor i have.

You'd have to call DD for that info. I don't have a caliper to measure it.