7" motor

[SPLaudio 5,000+ posts]

looking for a nice 7" motor to build a badd aurse 8".

what ya got on the cheap guys 2.5 or 3" coil. please pm me...

Click to read more...

 

[Kangaroux 5,000+ posts]

oh boy //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[SPLaudio 5,000+ posts]

already got the basket and i did a lil machining //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[tpmeredith 10+ year member]

how much power you planning on this thing to handle?

 

[tc3k101 5,000+ posts]

Interested in a hx2 motor? Do you want the top plate od to be 7" or the od of the slugs?

 

[slim2fattycake 10+ year member]

give me a second, i gotta check. got a couple sitting around.

 

[nateberrier 10+ year member]

id max motor //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[mossberg385t 10+ year member]

SSX motor //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[SPLaudio 5,000+ posts]

7" with 2.5-3" coil. i can make a 2.5" coiled 8" sub handle 1000rms no prob...

 

[09civic 5,000+ posts]

7" with 2.5-3" coil. i can make a 2.5" coiled 8" sub handle 1000rms no prob...

holy 8.... have very little xmax correct?

 

[SPLaudio 5,000+ posts]

ohh no called 25mm+ total //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

---------- Post added at 04:26 PM ---------- Previous post was at 04:25 PM ----------

 

each way

 

[Inferno333 10+ year member]

There was a 2.5" coil Cadence motor with a ton of clearance on CACO.

 

[dbeez 5,000+ posts]

i have an audiobahn immortal motor that should fit the bill but i want $65 for it i will have to get to storage and get it out.

 

[retrojordans 10+ year member]

A couple motors here for ya if you're interested.

These MTX Thunder 8000's are in very very good condition, and were used by a mature adult. The only thing that was wrong with them when I got them was one tinsel lead on each sub was broken off at the cone. The voice coils are in pristine condition, aesthetically nice with no discoloration or signs of wear. These 3 subs were not blown or abused I only mention this because there will be no caked on melted glue residues on the inside of the gap to deal with.

This JL W6V1 is definitely a few years old. The Top plate ID should probably be turned approx. 0.5mm just to even out it's surface ( I would at least ) And as you know these W6's used rivets as opposed to a screw/nut configuration for basket attachment. The rivets have been ground down just enough for basket removal and may still be used as an allignment point in conjunction with glue. Or you can grind them off completely and attach a basket however you see fit. The motor will also come with the rubber slug guard that comes standard on the old W6's.

My pricing is negotiable on these. Send me a private message if you are interested.

 

Thanks,

 

-Steve

 

[SPLaudio 5,000+ posts]

^ none of those motors are 7" sorry. i thought the mtx8000 had 3" coils,lol...