6x9's or components

[Dmascarel 10+ year member]

I have a dodge charger which is 6x9s in the front doors and 6x9s in the rear deck, should I change my front door speakers to components or should I just get 6x9s all the way around, im wanting to change out all the factory equipment, but not sure if I should have 4 6x9s or do 6x9s in the rear and get a set of components for up front and make new plates for the components. which also brings me to my next question what are some good budget 6x9s for my rear deck?

Click to read more...

 

[Omg Itz Layz 10+ year member]

componets

 

[goingdef 10+ year member]

I would have to go high end 6x9's all the way around more cone=better/more b*** and mid-b*** and just louder.

 

[goingdef 10+ year member]

when did b-a-s-s become a no no?

 

[Dmascarel 10+ year member]

I was thinking 6x9s just because its easier, and I figured 6x9s would be sufficient for me, im just not sure the qualiy of vocals would be enough to match the b*** from the subs, not alot of experience with 6x9s

 

[goingdef 10+ year member]

In every high b*** output I have done I used 6x9's if the opportunity was there in one hatch setup we had to box/amp a set to get the vocals over the b*** won't pretty but sounded great.

 

[Dmascarel 10+ year member]

Ok then this leads to my next question, What are some good 6x9s for about $100 bucks a pair ($200 for all 4) that would be good with an old zapco reference 150 watt amp.