600 Watt Amp

[Steven206Seattl 10+ year member]

I was wondering if there is a good 2 channel amp that I can bridge for 600 watts. I want to power my MTX 7500. It's a single voice coil 4 ohms. I want to get a good amp but not spend a lot. I want to get somethin that's a good brand.

Click to read more...

 

[jasperpso 10+ year member]

phoenix gold x600.1

200 delivered on ebay

600X1 into a 4 ohm or 2 ohm load

will work great for any sub you might buy needing 600-800 watts

 

[Steven206Seattl 10+ year member]

If a amplifier says it puts out 300 watts bridged is that RMS? Can you run it higher than 300 watts?

 

[xluben 10+ year member]

give us a link and we'll let you know!

 

[zfactor 10+ year member]

x2 on the xenon but good luck finding them now they are becoming scarce.. i may have a few coming or left not sure till tomm lmk if you are looking...

 

[slc72005 10+ year member]

x3 on the xenon 600.1 puts out rated power at 1,2,3,or 4 ohm load.

every birthsheet i have seen on the x600.1 have been over 810rms, with most being about 830rms

the best bet for your money the amp is overbuilt like a tank

 

[Steven206Seattl 10+ year member]

http://www.mtx.com/caraudio/products/amplifiers/thunder5302.cfm That was the amp I was thinking of getting. MTX has expensive amps though. I never heard of the xeons. How much are they? Are all of the other brands that aren't heard of good or are their certain brands that are better cuz i'm seein mtxs with 500 watts for400 then i see 600 watts for 150.

 

[zfactor 10+ year member]

the xenon is made by phoenix gold... they can be had for right about 200 if you get one while you can they all test out over 800watts.. a ton of amp for the money

 

[Steven206Seattl 10+ year member]

Do you sell them online somewhere like a site?

 

[zfactor 10+ year member]

well you can check ebay. i bought some out and had some for sale.. i sold those on different forums.. if you question my honesty call pg and ask errin there. he is the head technical guy i know him well... as many others there he will vouch for me... i think i may have 1 or 2 more at the shop have to check tomm.. or im sure i can get one in... i bought a bunch for me to use in a car i was planning then decided to go another direction with that car... gonna be a spl shop car now.. i can check tomm..look em up on google...x600.1

 

[QtrHorse 10+ year member]

zfactor is a great guy to deal with. I bought one of the amps he had in the for sale section and the deal went very smooth and the amp arrived quickly.

As he stated, they are getting very hard to find on Ebay for under $200. There are only two on Ebay at the moment. One is just a tad over $200 and the other is listed for $320 //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[denim 5,000+ posts]

New US Amps XT 1600.2 is around 650w x1 @4 mono.

 

[Steven206Seattl 10+ year member]

Are there any good phoenix 2 channel amps? Single voice coils its better to bridge isn't it. Those phoenix amps look good though.

 

[slc72005 10+ year member]

Are there any good phoenix 2 channel amps? Single voice coils its better to bridge isn't it. Those phoenix amps look good though.

the xenon line it doesnt matter same power at 1,2,3, or 4 ohms wire the coil how you think it sounds better.

yes they have some killer 2 channel amps also xenon 100.2, 200.2 and of there series like ms273, ms2125, ms2250 and a several other amps.

 

[Steven206Seattl 10+ year member]

Theses amps are tight. Why are they so much cheaper than mtx. I know i'll get one of these now. They have lots of power cheaper.