6 shiny new sub's ! but what make and model are they !?

sideshowbob

Junior Member
25
0
uk
http://i333.photobucket.com/albums/m389/machinedred/Mobile%20Uploads/IMG_20140118_183043.jpg

Hi guys I want to build a ported single box for all 6 sub's but I need to find the thiele for them any help greatly appreciated http://i333.photobucket.com/albums/m389/machinedred/Mobile%20Uploads/IMG_20140118_183150.jpghttp://i333.photobucket.com/albums/m389/machinedred/Mobile%20Uploads/IMG_20140118_183047.jpg its a 10 inch twin voice coil 4ohm each the dust cap seems to be stuck on by hand not perfectly centred like its a later mod to a manufactured driver , all i can find is a similar Orion basket and motor I need some specs as this box is going to take a lot of work .

 
Last edited by a moderator:
sa-series.html
 
Looks like a Sundown SA basket, with some other motor. I am not sure though, we are gonna need a guru, or two.
Tons of subs have that basket. Subs before Sundown was even a company.

Could be anything. Orion used those baskets, Audiomobile used them, pretty sure Eclipse used them.

OP remove the rubber boot around the magnets on the motor. There may be a sticker on the motor with some identification.

 
Being that these are a mystery woofer and no one seems to know what they are or have any specs for them I think you are going to have to take a shot in the dark on this one or buy yourself a woofer tester or similar device. Most 10 inch subs work well in 1.25 cubic feet per sub tuned to 32-35 hz. With no tsp's I would start there and see what it sounds like. Looks like a nice little driver you have there. I am sure with a decent enclosure behind them you would be happy

 
Make an adjustable aeroport would be my 2 cents.
thanks guys ! Great suggestions , so far I have tried a 0.5,0.6,0.88,1 sealed and a 1.8 ported at 33 the driver really struggles under 0.88 , the ported 1.6 sounds amazing at 45 hz but tails off towards its port tuned frequency anything less than 33 is just massive movement with little dB . should I make my box for all six one big enclosure or 2 or 3 enclosures ? Its a tight squeeze in The back of my Austin mini pickup truck and the port will fire into the tiny cab (behind the seat) which is only a few cu ft itself , how will this effect my box size and porting ?? Thank you for your replies in advance .bob
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
241
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
334
What is your budget? With being exposed to Rain.. I would recommend looking at a marine grade SAS Bazooka for the sub stage
3
488
Don't forget Hoffman's Iron Law. You can have 2 of the 3: low end, efficiency/sensitivity or small enclosure size...
4
600

About this thread

sideshowbob

Junior Member
Thread starter
sideshowbob
Joined
Location
uk
Start date
Participants
Who Replied
Replies
15
Views
1,283
Last reply date
Last reply from
whitedragon551
1716436519534.png

Doxquzme

    May 22, 2024
  • 0
  • 0
tip.gif

1aespinoza

    May 22, 2024
  • 0
  • 0

New threads

Top