45 for 3" port

[av83 10+ year member]

I need to know how how wide the the port 45 should be in 3" slot port.

Click to read more...

 

[BlactimusCrime 10+ year member]

try to keep the port consistently 3" wide

 

[av83 10+ year member]

try to keep the port consistently 3" wide

that's what i'm aiming for, should be the same for all 3" ports... you know it off hand so i can just measure and cut?

 

[BlactimusCrime 10+ year member]

that's what i'm aiming for, should be the same for all 3" ports... you know it off hand so i can just measure and cut?

just draw it out on a piece of paper and measure. its not hard.

 

[THATpurpleKUSH 5,000+ posts]

geometry is your friend, its not very hard at all

 

[av83 10+ year member]

just draw it out on a piece of paper and measure. its not hard.

duh. //content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif

I must need more coffee. I feel like a dumbass now, lol....

 

[BlactimusCrime 10+ year member]

It kinda looks like the long side of your 45 piece should be about 2.5", but thats a guesstimation, Double check it

 

[BlactimusCrime 10+ year member]

It kinda looks like the long side of your 45 piece should be about 2.5", but thats a guesstimation, Double check it

Confirmed.

And the back should be a bout an inch

 

[av83 10+ year member]

Thanks Blactimus!

 

[av83 10+ year member]

geometry is your friend, its not very hard at all

I know. I still don't know why I didn't just grab a piece of paper.... internetz made me lazy, lol