$430 in PP WTB: SUB PART & 8" baskets

[PioneerSPL1990 10+ year member]

looking for 8" Baskets

looking for 8"/10" soft parts, 3" coil (d2) to fit 2002 mojo Q1 motor.

LMK what u have!

Click to read more...

 

[woofercooker 10+ year member]

I have the perfect coils

 

[tc3k101 5,000+ posts]

what are the measurements on the motor? what is the tallest coil you can fit?

i have a pretty sweet coil here.

8layer with a winding height of 75mm

 

[PioneerSPL1990 10+ year member]

i have no idea the gap is quite large LM google it im sure its on there someone else has to know the measurements, its a common sub memphis mojo q1 coil.

 

[woofercooker 10+ year member]

mojo gap has a good amount of room

 

[PioneerSPL1990 10+ year member]

also looking for high roll 8" and 10" surrounds. possibly even 15" parts i just painted up a basket spend a couple hours doing it the right way amd painted it with appliance enamel, white.

 

[PioneerSPL1990 10+ year member]

lm see if i can rough it with a metric ruler and paper for depth.

 

[woofercooker 10+ year member]

I have all parts you need and I will soon have more 8" cones

 

[Korn4Life 5,000+ posts]

I have 15" DD Surrounds...

 

[PioneerSPL1990 10+ year member]

heres my rough measurements.

bottom of gap to top of top plate is 4.5"

pole piece circumfance = 9 5/8" or a diameter of~3.06"

magnet inside diameter= 10.5" or a diameter of~ 3.35"

so approx .30" gap.

 

[PioneerSPL1990 10+ year member]

I have 15" DD Surrounds...

pics, arnt they foam?

 

[tc3k101 5,000+ posts]

go with woofercooker he has what you need and more //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[PioneerSPL1990 10+ year member]

I have all parts you need and I will soon have more 8" cones

can u shoot me some set together pics, just for ideas, and PM me or list some prices with pics.

 

[ssackett 10+ year member]

hmm Need a quad 1 8 layer coil with 3.3" OD and 2" WW? $45

 

[PioneerSPL1990 10+ year member]

hmm Need a quad 1 8 layer coil with 3.3" OD and 2" WW? $45

really just looking for D2 coil, but i could probably wire the Q1 under the dust cap to D2 right?