420 SQ inches

[cj407]

you only want 16sq in of port per cube...so 24 sq in would be fine...2" wide port 12" tall.or 3" wide 8" tall

 

[cj407]

wow late post...oh well point is still across you only need 20-24 sq in of port if doing slot...if doin aero 1 4" port will be enough

 

[IMOVeCHICKENS! 10+ year member]

yea i dont know what i was thinking about that port idea but it shouldnt be too tough to build this box i designed built my first sealed box for my 2 15s and i hit a 142 so i got the concept down ^^

 

[jonny101abc 10+ year member]

don't smoke weed when doing box designs, your numbers will be off LOL

 

[IMOVeCHICKENS! 10+ year member]

hell yea they were off wonder if its a coincidence that i got 420 sq in of port lol

 

[basscort2009 5,000+ posts]

420 sq in of port good for 1 hdc3 10 tuned to 39.5 hz in 1.5 cubic ft?

just want to know if i did my math right and this all makes sense lol

sig'd! lol i think instead of length x width u did length x wide x depth of the port. honest mistake

 

[D.Joymn]

I found some plans for a loft bed that would suit our needs very well, but they are metric. I am thinking of just converting all of the measurements to inches, has anyone done this and if so, what types of problems will I see when I finally start cutting and nailing?

Thanks.

 

[Blue Fury 10+ year member]

Its a shame people can't even understand BASIC dimensional analysis.

Unit Length x Unit Length x Unit Length = Unit Length^3, NOT Unit Length^2

 

[IMOVeCHICKENS! 10+ year member]

sig'd! lol i think instead of length x width u did length x wide x depth of the port. honest mistake

exactly what i did but atleast my measurements where right lol

 

[PV Audio 5,000+ posts]

I found some plans for a loft bed that would suit our needs very well, but they are metric. I am thinking of just converting all of the measurements to inches, has anyone done this and if so, what types of problems will I see when I finally start cutting and nailing?
Thanks.

Um, who exactly is our?

 

[King_corral 10+ year member]

This is somebodys sister in my avatar.

 

[basscort2009 5,000+ posts]

exactly what i did but atleast my measurements where right lol

yea they were right though! lol