4 Tang Bang 6.5" sub BOX **PICS**

[phyphoestilic 5,000+ posts]

holy clamps batman!

 

[ssj2xxgotenxx 10+ year member]

I wish I had that many clamps... I hate dealing with screws.

 

[SQBubble 10+ year member]

ok so i finished the box, messed it up a bit ( only looks) but its built like a tank IMO!

picture are coming

 

[SQBubble 10+ year member]

I wish I had that many clamps... I hate dealing with screws.

i actually like screws a bit more, I think its faster and hold tight for sure, when glueing, you really have to make sure its well clamped then wait till it drys...

depends on the person's patience I guess.

i finished the box with screws and little bit of glue, wasnt patient anymore for clamping, loll

 

[iamamp3pimp 5,000+ posts]

how liong were you waiting on the glue to dry?

 

[SQBubble 10+ year member]

how liong were you waiting on the glue to dry?

20-30min.

 

[creyc 10+ year member]

30 minutes!?

 

[SQBubble 10+ year member]

ya how much you guys wait ?

 

[Chevyaudio 5,000+ posts]

Looks like it was cold where you were building...

 

[SQBubble 10+ year member]

Looks like it was cold where you were building...

yea that's correct, 5°F

i feel it glues less than when i was clamping my other box in summer

 

[SQBubble 10+ year member]

alright so there are the pics!!1!!

2braces are on on the port:

port is screwed on the box and lot of silicone used to ensure no gap what so ever..//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

3rd brace on:

4th and 5th brace on:naughty: , (yes i'm made overkill bracing just for some 6.5" )

little comparo

 

[SQBubble 10+ year member]

here is the first baffle:

plugged the terminal

first baffle being clamped and screwed with the braces before I ate

after an hour, very solid...

 

[SQBubble 10+ year member]

top view:

the top has been clamped also!

now here is the second baffle :

 

[SQBubble 10+ year member]

second baffle has been screwed!! YaY for FLUSH MOUNT:veryhapp:

wired everything :

4gauge loops for 13gauge speaker cables, secured nice and tight haha

little test fit:

yay:

i've putted some speaker gasket tape:

inside shot:

 

[SQBubble 10+ year member]

FINAL RESULT

And finally, to make sure connection are good and ready to bump:

1ohm

hopefully TOMORROW WILL POST VIDS OF THEM IN ACTION AND A SMALL REVIEW

btw box is 2.6cu.ft NET @ 34hz

amplifier will be opti1400d (1000rms)

comments? flame?

SHOOT