Sold 4" parts, and Konaki woofer for sale

02parkave
5,000+ posts

Banned
Rating: 0%
0 0 0
Alright ladies and gentlemen, time has come to get rid of some parts that will not be used in the near future (by me anyways:)) these are all 4" parts (i know 4" recones are a bit harder to find.. save yourself time, and money this way!) and no, i will NOT sell 3" parts. please dont even ask.

Alrighty then.. off we go. all prices DO NOT include shipping. prices are obo, but don't lowball me, as i don't NEED to sell this stuff. thanks. I will do a discount if you buy more than one thing. please ask if you need any other pics, and i will be happy to take them!

Start with coils. all coils are standard 4" us sized coils (tc sounds, cactus sounds, t3 audio, atomic, rd, concept, re, etc. all have 4" coil motors), all specs can be had by simply asking (id,od,ww,material,gauge wire, former height, etc) prices are set at $25 each coil

Coil #1 (one available)

DVC 3.0 ohm

Round aluminum wire, on a titanium former

Coil #2 (3 available)

DVC 2.0 ohm

Flatwound aluminum, on a black aluminum former

Coil #3 (2 available)

QVC 2.0 ohm

Flatwound alum wire, on an aluminum former

pic-

4partssale006.jpg


Moving on, lets tackle baskets. I have only a few frames available, most are used, one or 2 are new. all came off 4" coil motors (wider cutouts) not cleaned off, no terminals. good shape otherwise! I also must note- some of the baskets are cutout for the tc sounds qca rings. these DO NOT include the rings. PLEASE CHECK TO MAKE SURE THESE WILL EITHER BOLT UP, OR YOU HAVE THE MEANS TO PAR THEM FOR NEW HOLES! as there will be no refunds, unless item arrives broken. Price is set at $30 each.

I have-

1 NEW tc sounds 18" TI frame. uncoated (silver)

1 USED tc sounds 18" TI frame (cutout for the qca ring) red in color (not pictured. i can provide pics)

1 USED tc sounds 18" TI frame grey in color

1 USED tc sounds 15" ti frame (cutout for the qca ring) silver pc. color

1 USED soundstream 15" XXX frame. silver in color

2 USED rockford fosgate team rf baskets. blue in color

pic-

4partssale004.jpg


spiders-

I only have a few of these to sell atm, sadly. i can get more if needed, though. i have 2 polycotton, w/o leads. medium stiffness, and 2 nomex w/ woven leads. these are stiff. very good for an spl based driver. price is set at 7.50 each.

pic-

4partssale005.jpg


cones-

a bit of a variety here. the alum cones will come with matching dust caps. i have 1 nomex dustcap. so that one is first come first served. these are all 15" cones, unless noted. price is set at $25 each.

i have-

15" alum cones w/ wide foam surround (2 piece, NOT THE ONE PIECE THAT BROKE ON TC) these are the cones currently used on the German brand ground zero's plutonium (top model) woofer. very nice! i have 4-6 available.

15" nomex honeycomb w/wide foam surround (like the tc sounds oem 10 cone) these need the surrounds attached (super easy to do!) i love these cones. very lightweight. i almost hate to part with them, and it wouldn't hurt my feelings if they dint sell! 2 available.

12 OR 15" Titanium cone w/wide foam surround. same cones used on the eclipse TI and TI pro woofers. Will come with coil collar. only 1 available. buyer gets there choice of 12 or 15" size.

pics-

4partssale001.jpg


4partssale003.jpg


4partssale002.jpg


 
How much for the cat? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
can you get a better pic of the dent in the ed sub (all i noticed was a glare from camera)? if not to bad i'll probably take it. and that konaki a 10"?
Its more of a crease vs. a dent, it was pushed in by the original owner then a vacume was used to pop the cap back out.

 
Hey there //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

I'll take 4 18" TC baskets - preferrably 2 matching sets of em, I need 2 of the #2 coils, both of the 10" nomex spider with woven leads and both of the ploycotton spiders.

Important PM sent as well.

 
no. i have coils with spiders and spider spacers already assembled. they would require a cone and a frame to be a full top. thanks. (they are basically an assembled recone, w/o a cone. look like this-
parts005.jpg
ah, ok, are any of them higher ohm like d3 or d4? whats the largest OD coils you have? my goal is to fill the gap as much as possible, also they're gapped for height on TI baskets without QCA? that would change the height wouldn't it? I have to go look at mine I suppose.. also I'd be interested in an 18" basket and cone pm me if you have any //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I don't want the honeycomb I've broke too many of those to EVER want them again... thanks,

Tom

 
Its more of a crease vs. a dent, it was pushed in by the original owner then a vacume was used to pop the cap back out.
yes sir:) i can take new pics if needed, but this man is right. more of a crease.

Hey there //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gifI'll take 4 18" TC baskets - preferrably 2 matching sets of em, I need 2 of the #2 coils, both of the 10" nomex spider with woven leads and both of the ploycotton spiders.

Important PM sent as well.
i will pm you.

replied

ah, ok, are any of them higher ohm like d3 or d4? whats the largest OD coils you have? my goal is to fill the gap as much as possible, also they're gapped for height on TI baskets without QCA? that would change the height wouldn't it? I have to go look at mine I suppose.. also I'd be interested in an 18" basket and cone pm me if you have any //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I don't want the honeycomb I've broke too many of those to EVER want them again... thanks,
Tom
Tom- depends where the qca ring is put. if you attatch it to the bottom of the basket, yes. it will cahnge the height. however, if it is placed inside the motor (like these were set up for) than it is the same as bolted down basket. i will check all the ohm loads tomorrow. tahnks

did you ever hook the konaki up to hear it?
tested for operation only.

trades..sry dont have time to read all thread just curious.
sorry, no:(

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

02parkave

5,000+ posts
Banned
Thread starter
02parkave
Joined
Location
Oklahoma City, Oklahoma
Start date
Participants
Who Replied
Replies
32
Views
2,210
Last reply date
Last reply from
SiX
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top