Sold 4" parts, and Konaki woofer for sale

02parkave
5,000+ posts

Banned
Rating: 0%
0 0 0
Alright ladies and gentlemen, time has come to get rid of some parts that will not be used in the near future (by me anyways:)) these are all 4" parts (i know 4" recones are a bit harder to find.. save yourself time, and money this way!) and no, i will NOT sell 3" parts. please dont even ask.

Alrighty then.. off we go. all prices DO NOT include shipping. prices are obo, but don't lowball me, as i don't NEED to sell this stuff. thanks. I will do a discount if you buy more than one thing. please ask if you need any other pics, and i will be happy to take them!

Start with coils. all coils are standard 4" us sized coils (tc sounds, cactus sounds, t3 audio, atomic, rd, concept, re, etc. all have 4" coil motors), all specs can be had by simply asking (id,od,ww,material,gauge wire, former height, etc) prices are set at $25 each coil

Coil #1 (one available)

DVC 3.0 ohm

Round aluminum wire, on a titanium former

Coil #2 (3 available)

DVC 2.0 ohm

Flatwound aluminum, on a black aluminum former

Coil #3 (2 available)

QVC 2.0 ohm

Flatwound alum wire, on an aluminum former

pic-

4partssale006.jpg


Moving on, lets tackle baskets. I have only a few frames available, most are used, one or 2 are new. all came off 4" coil motors (wider cutouts) not cleaned off, no terminals. good shape otherwise! I also must note- some of the baskets are cutout for the tc sounds qca rings. these DO NOT include the rings. PLEASE CHECK TO MAKE SURE THESE WILL EITHER BOLT UP, OR YOU HAVE THE MEANS TO PAR THEM FOR NEW HOLES! as there will be no refunds, unless item arrives broken. Price is set at $30 each.

I have-

1 NEW tc sounds 18" TI frame. uncoated (silver)

1 USED tc sounds 18" TI frame (cutout for the qca ring) red in color (not pictured. i can provide pics)

1 USED tc sounds 18" TI frame grey in color

1 USED tc sounds 15" ti frame (cutout for the qca ring) silver pc. color

1 USED soundstream 15" XXX frame. silver in color

2 USED rockford fosgate team rf baskets. blue in color

pic-

4partssale004.jpg


spiders-

I only have a few of these to sell atm, sadly. i can get more if needed, though. i have 2 polycotton, w/o leads. medium stiffness, and 2 nomex w/ woven leads. these are stiff. very good for an spl based driver. price is set at 7.50 each.

pic-

4partssale005.jpg


cones-

a bit of a variety here. the alum cones will come with matching dust caps. i have 1 nomex dustcap. so that one is first come first served. these are all 15" cones, unless noted. price is set at $25 each.

i have-

15" alum cones w/ wide foam surround (2 piece, NOT THE ONE PIECE THAT BROKE ON TC) these are the cones currently used on the German brand ground zero's plutonium (top model) woofer. very nice! i have 4-6 available.

15" nomex honeycomb w/wide foam surround (like the tc sounds oem 10 cone) these need the surrounds attached (super easy to do!) i love these cones. very lightweight. i almost hate to part with them, and it wouldn't hurt my feelings if they dint sell! 2 available.

12 OR 15" Titanium cone w/wide foam surround. same cones used on the eclipse TI and TI pro woofers. Will come with coil collar. only 1 available. buyer gets there choice of 12 or 15" size.

pics-

4partssale001.jpg


4partssale003.jpg


4partssale002.jpg


 
also- i have a BUNCH of random, smaller coils. i acquired them in a trade, and realized the formers are FAR to short for anything i would need. so i will throw em up here.. someone would maybe want them to play with.. lets say.. $50 for the whole lot!

pics-

coils003.jpg


coils002.jpg


coil001.jpg


also have the konaki woofer up for sale. bought to test, and i just do not have time to do it. hooked up ONLY to check for proper operation. d1 ohm coils. lets say $115 for this woofer.

pic-

konakiwoofers010.jpg


konakiwoofers007.jpg


konakiwoofers008.jpg


(middle)

konakiwoofers009.jpg


konakiwoofers006.jpg


 
Hey, would any of these parts work with the Konaki motor, I am wondering if I could make a franken woofer with some of the assorted parts you have here.

I am interested in the Titanimum cone with wide foam surround, I always wanted one of those Eclispe subs that had that surround.

I guess I could go with the 15" one, so, you have coils, baskets and surrounds, basicly, I could buy a complete top assembly from you and all I would need is some glue and a motor and I would be set to try and build my very own woofer?

I will talk to you about it later on when you get up //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Got any 4hp motor's for sale? price & pictures. specs.
sorry, not at this time. wish i could help you!

I think he has some but he is keeping those for his personal projects.
yes

Hey, would any of these parts work with the Konaki motor, I am wondering if I could make a franken woofer with some of the assorted parts you have here.
I am interested in the Titanimum cone with wide foam surround, I always wanted one of those Eclispe subs that had that surround.

I guess I could go with the 15" one, so, you have coils, baskets and surrounds, basicly, I could buy a complete top assembly from you and all I would need is some glue and a motor and I would be set to try and build my very own woofer?

I will talk to you about it later on when you get up //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
we will caht. but short answer is- no, these will not work with the konaki.

 
Nice parts //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif A bit OT... but do you have any baskets for sale, by chance? I seem to be short one to re-build all the stuff I have laying around!

 
can you get a better pic of the dent in the ed sub (all i noticed was a glare from camera)? if not to bad i'll probably take it. and that konaki a 10"?

 
Nice parts //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif A bit OT... but do you have any baskets for sale, by chance? I seem to be short one to re-build all the stuff I have laying around!
what size you need?

can you get a better pic of the dent in the ed sub (all i noticed was a glare from camera)? if not to bad i'll probably take it. and that konaki a 10"?
sure. give me a bit, and its done!

 
Jesus dude, I wish i had some extra cash for tyhe Konaki... I would test it and review it.. thats a mean deal, too bad the car payment is Due //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Feeling generous?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

02parkave

5,000+ posts
Banned
Thread starter
02parkave
Joined
Location
Oklahoma City, Oklahoma
Start date
Participants
Who Replied
Replies
32
Views
2,208
Last reply date
Last reply from
SiX
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top